Internet DRAFT - draft-wang-lime-yang-pm
draft-wang-lime-yang-pm
Network Working Group Z. Wang
Internet-Draft Q. Wu
Intended status: Standards Track Huawei
Expires: May 31, 2016 D. Kumar
Cisco
T. Taylor
PT Taylor Consulting
November 28, 2015
Generic YANG Data Model for Operations, Administration, and Maintenance
(OAM) Performance Management
draft-wang-lime-yang-pm-01
Abstract
This document presents a YANG Data model for OAM Performance
management support. The YANG Model presented in this document
extends the Generic YANG Data Model for OAM with Loss Measurement and
Delay measurement to support OAM Performance management.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on May 31, 2016.
Copyright Notice
Copyright (c) 2015 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
Wang, et al. Expires May 31, 2016 [Page 1]
Internet-Draft Gen OAM PM Model November 2015
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Conventions and Terminology . . . . . . . . . . . . . . . . . 2
2.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3
3. YANG Extension . . . . . . . . . . . . . . . . . . . . . . . 4
3.1. MEP Configuration Extension . . . . . . . . . . . . . . . 4
3.1.1. Loss Measurement Configuration . . . . . . . . . . . 4
3.2. Delay Measurement Configuration . . . . . . . . . . . . . 5
3.3. rpc definitions . . . . . . . . . . . . . . . . . . . . . 8
3.3.1. create-loss-measurement . . . . . . . . . . . . . . . 8
3.3.2. abort-loss-measurement . . . . . . . . . . . . . . . 8
3.3.3. create-delay-measurement . . . . . . . . . . . . . . 8
3.3.4. abort-delay-measurement . . . . . . . . . . . . . . . 8
4. PM data hierarchy . . . . . . . . . . . . . . . . . . . . . . 8
5. PM YANG Module . . . . . . . . . . . . . . . . . . . . . . . 14
6. Security Considerations . . . . . . . . . . . . . . . . . . . 35
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 35
8. References . . . . . . . . . . . . . . . . . . . . . . . . . 35
8.1. Normative References . . . . . . . . . . . . . . . . . . 35
8.2. Informative References . . . . . . . . . . . . . . . . . 35
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 36
1. Introduction
Generic OAM Yang model [GENYANGGOAM] presents Generic Yang data model
for all OAM technologies.
In this document we extend the YANG model defined in [GENYANGGOAM]
with Loss Measurement and Delay measurement to support OAM
Performance management. Details are provided in section 4 below.
2. Conventions and Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
The following terms are defined in [RFC6241] and are not redefined
here:
o client
Wang, et al. Expires May 31, 2016 [Page 2]
Internet-Draft Gen OAM PM Model November 2015
o configuration data
o server
o state data
The following terms are defined in [RFC6020] and are not redefined
here:
o augment
o data model
o data node
The terminology for describing YANG data models is found in
[RFC6020].
2.1. Terminology
MP - Maintenance Point [8021.Q]
MEP - Maintenance End Point [RFC7174] [8021Q] [RFC6371]
MIP - Maintenance Intermediate Point [RFC7174] [8021.Q] [RFC6371]
MA - Maintenance Association [8021.Q] [RFC7174]
MD - Maintenance Domain [8021.Q]
OAM - Operations, Administration, and Maintenance [RFC6291]
DMM - Delay Measurement Message
1SL - One-way Synthetic Loss Measurement message
1DM - One-way Delay Measurement message
DMR - Delay Measurement Reply
PM - Performance Monitoring
SLM - Synthetic Loss Measurement Message
SLR - Synthetic Loss Measurement Reply
Wang, et al. Expires May 31, 2016 [Page 3]
Internet-Draft Gen OAM PM Model November 2015
3. YANG Extension
MEP Addressing is defined in Generic YANG OAM model[GENYANGGOAM]. In
this draft we augment MEP Configuration with Performance Management
configuration and statistics for Delay Measurement and Performance
Measurement. In addtion, we define new rpcs for performance
measurement.
3.1. MEP Configuration Extension
3.1.1. Loss Measurement Configuration
This section describes a set of data definitions for Loss Measurement
configuration. This set of data defintions augment the MEP
configuration defined in the Generic YANG OAM model with parameters
related to Loss Measurement and define the role of MEP and
measurement method of the loss measurement.
module: ietf-gen-oam-pm
/*This set of data definitions defines the role of MEP.*/
augment /goam:domains/goam:domain/goam:MAs/goam:MA/goam:MEP:
+--rw loss-responder? Boolean
/*This set of data definitions defines loss measurement configuration*/
augment /goam:domains/goam:domain/goam:MAs/goam:MA/goam:MEP:
+--rw loss-measurements?
+--ro loss-measurements* [session-cookie]
| +--ro session-cookie uint32
| +--ro id? string
| +--ro status? Boolean
+--rw measurement-type
| +--rw slm? boolean
| +--rw pm_1sl? boolean
+--rw enabled-counters
| +--rw availability-forward-high-loss? boolean
| +--rw availability-forward-availables? boolean
| +--rw availability-forward-unavailable? boolean
| +--rw availability-backward-high-loss? boolean
| +--rw availability-backward-consecutive-high-loss? boolean
| +--rw availability-backward-available? boolean
| +--rw available-backward-unavailable? boolean
+--rw message-period? uint32
+--rw data-pattern? enumeration
+--rw measurement-interval? uint32
+--rw number-intervals-stored? uint32
+--rw availability-measurement-interval? uint32
+--rw availability-consecutive-intervals-number? unit32
+--rw session-type? enumeration
Wang, et al. Expires May 31, 2016 [Page 4]
Internet-Draft Gen OAM PM Model November 2015
+--rw thresholds* [id]
| +--rw id uint32
| +--rw enabled-threshold
| | +--rw forward-unavailable-count? boolean
| | +--rw backward-unavailable-count? boolean
| | +--rw forward-available-ratio? boolean
| | +--rw forward-available-ratio? boolean
| +--rw forward-unavailable-count uint32
| +--rw backward-unavailable-count uint32
| +--rw forward-available-ratio? uint32
| +--rw backward-available-ratio? uint32
+--rw start-time
| +--rw (start-time)?
| +--:(immediate)
| | +--rw immediate!
| +--:(absolute)
| +--rw absolute? yang:date-and-time
+--rw stop-time
| +--rw (stop-time)?
| +--:(none)
| | +--rw none!
| +--:(absolute)
| +--rw absolute? yang:date-and-time
+--rw availability-forward-status enumeration
+--rw availability-backward-status enumeration
+--rw current-stats
| +--rw start-time? yang:date-and-time
| +--rw elapsed-time? uint32
| +--rw suspect-status? boolean
| +--rw forward-available? yang:gauge32
| +--rw backward-available? yang:gauge32
| +--rw forward-unavailable? yang:gauge32
| +--rw backward-unavailable? yang:gauge32
+--rw history-stats* [id]
+--rw id uint32
+--rw start-time? yang:date-and-time
+--rw elapsed-time? uint32
+--rw suspect-status? Boolean
+--rw forward-available? yang:gauge32
+--rw backward-available? yang:gauge32
+--rw forward-unavailable? yang:gauge32
+--rw backward-unavailable? yang:gauge32
3.2. Delay Measurement Configuration
This section describes data definition for Delay Measurement
configuration. This data defintion augments the MEP configuration
defined in the Generic YANG OAM model with parameters related to
Wang, et al. Expires May 31, 2016 [Page 5]
Internet-Draft Gen OAM PM Model November 2015
Delay Measurement and defines the role of MEP and measurement method
of the delay measurement.
Wang, et al. Expires May 31, 2016 [Page 6]
Internet-Draft Gen OAM PM Model November 2015
module: ietf-gen-oam-pm
/*This set of data definitions defines the role of MEP.*/
augment /goam:domains/goam:domain/goam:MAs/goam:MA/goam:MEP:
+--rw delay-responder? Boolean
/*This set of data definitions defines delay measurement configuration*/
augment /goam:domains/goam:domain/goam:MAs/goam:MA/goam:MEP:
+--rw delay-measurements?
+--ro delay-measurements* [session-cookie]
| +--ro session-cookie uint32
| +--ro id? string
| +--ro status? boolean
+--rw measurement-type
| +--rw dmm? boolean
| +--rw dm1-transmitted? boolean
| +--rw dm1-received? boolean
+--rw measurement-enable
+--rw message-period? uint32
+--rw data-pattern? enumeration
+--rw measurement-interval? uint32
+--rw number-intervals-stored? uint32
+--rw session-type? Enumeration
+--rw thresholds* [id]
| +--rw id uint32
| +--rw enabled-thresholds? bits
+--rw start-time
| +--rw (start-time)?
| +--:(immediate)
| | +--rw immediate!
| +--:(absolute)
| +--rw absolute? yang:date-and-time
+--rw stop-time
| +--rw (stop-time)?
| +--:(none)
| | +--rw none!
| +--:(absolute)
| +--rw absolute? yang:date-and-time
+--rw current-stats
| +--rw start-time? yang:date-and-time
| +--rw elapsed-time? uint32
| +--rw suspect-status? boolean
+--rw history-stats* [id]
+--rw id uint32
+--rw start-time? yang:date-and-time
+--rw elapsed-time? uint32
+--rw suspect-status? boolean
Wang, et al. Expires May 31, 2016 [Page 7]
Internet-Draft Gen OAM PM Model November 2015
3.3. rpc definitions
The rpc model facilitates issuing commands to a NETCONF server (in
this case to the device that needs to execute the OAM command) and
obtaining a response.
Configuration data in the Section 3.2 and Section 3.1.1 provides
input extension for Delay and Loss measurement RPCs.
3.3.1. create-loss-measurement
RPC allows scheduling of one-way or two-way on-demand or proactive
performance monitoring loss measurement session.
3.3.2. abort-loss-measurement
RPC allow aborting of currently running or scheduled loss measurement
session.
3.3.3. create-delay-measurement
RPC allow scheduling of one-way or two-way on-demand or proactive
performance monitoring delay measurement session.
3.3.4. abort-delay-measurement
RPC allow aborting of currently running or scheduled delay
measurement session.
4. PM data hierarchy
The complete data hierarchy related to the OAM PM YANG is presented
below. The following notations are used within the tree and carry
the meaning as noted below.
Each node is printed as:
Wang, et al. Expires May 31, 2016 [Page 8]
Internet-Draft Gen OAM PM Model November 2015
<status> <flags> <name> <opts> <type>
<status> is one of:
+ for current
x for deprecated
o for obsolete
<flags> is one of:
rw for configuration data
ro for non-configuration data
-x for rpcs
-n for notifications
<name> is the name of the node
If the node is augmented into the tree from another module, its name
is printed as <prefix>:<name>.
<opts> is one of:
? for an optional leaf or choice
! for a presence container
* for a leaf-list or list
[<keys>] for a list's keys
<type> is the name of the type for leafs and leaf-lists
module: ietf-gen-oam-pm
augment /goam:domains/goam:domain/goam:MAs/goam:MA/goam:MEP:
+--rw delay-responder? Boolean
+--rw loss-responder? Boolean
augment /goam:domains/goam:domain/goam:MAs/goam:MA/goam:MEP:
+--rw delay-measurements?
+--ro delay-measurements* [session-cookie]
| +--ro session-cookie uint32
| +--ro id? string
| +--ro status? boolean
+--rw measurement-type
| +--rw dmm? boolean
| +--rw dm1-transmitted? boolean
| +--rw dm1-received? boolean
+--rw measurement-enable
+--rw message-period? uint32
+--rw data-pattern? enumeration
Wang, et al. Expires May 31, 2016 [Page 9]
Internet-Draft Gen OAM PM Model November 2015
+--rw measurement-interval? uint32
+--rw number-intervals-stored? uint32
+--rw session-type? enumeration
+--rw start-time
| +--rw (start-time)?
| +--:(immediate)
| | +--rw immediate!
| +--:(absolute)
| +--rw absolute? yang:date-and-time
+--rw stop-time
| +--rw (stop-time)?
| +--:(none)
| | +--rw none!
| +--:(absolute)
| +--rw absolute? yang:date-and-time
+--rw current-stats
| +--rw start-time? yang:date-and-time
| +--rw elapsed-time? uint32
| +--rw suspect-status? Boolean
+--rw history-stats* [id]
+--rw id uint32
+--rw start-time? yang:date-and-time
+--rw elapsed-time? uint32
+--rw suspect-status? boolean
augment /goam:domains/goam:domain/goam:MAs/goam:MA/goam:MEP:
+--rw loss-measurements?
+--ro loss-measurements* [session-cookie]
| +--ro session-cookie uint32
| +--ro id? string
| +--ro status? boolean
+--rw measurement-type
| +--rw slm? boolean
| +--rw pm_1sl? boolean
+--rw enabled-counters
| +--rw availability-forward-high-loss? boolean
| +--rw availability-forward-availables? boolean
| +--rw availability-forward-unavailable? boolean
| +--rw availability-backward-high-loss? Boolean
| +--rw availability-backward-consecutive-high-loss? boolean
| +--rw availability-backward-available? boolean
| +--rw available-backward-unavailable? boolean
+--rw message-period? uint32
+--rw data-pattern? enumeration
+--rw measurement-interval? uint32
+--rw number-intervals-stored? uint32
+--rw availability-measurement-interval? uint32
+--rw availability-consecutive-intervals-number? unit32
Wang, et al. Expires May 31, 2016 [Page 10]
Internet-Draft Gen OAM PM Model November 2015
+--rw session-type? enumeration
+--rw thresholds* [id]
| +--rw id uint32
| +--rw enabled-threshold
| | +--rw forward-unavailable-count? boolean
| | +--rw backward-unavailable-count? boolean
| | +--rw forward-available-ratio? boolean
| | +--rw forward-available-ratio? boolean
| +--rw forward-unavailable-count uint32
| +--rw backward-unavailable-count uint32
| +--rw forward-available-ratio? uint32
| +--rw backward-available-ratio? uint32
+--rw start-time
| +--rw (start-time)?
| +--:(immediate)
| | +--rw immediate!
| +--:(absolute)
| +--rw absolute? yang:date-and-time
+--rw stop-time
| +--rw (stop-time)?
| +--:(none)
| | +--rw none!
| +--:(absolute)
| +--rw absolute? yang:date-and-time
+--rw current-stats
| +--rw start-time? yang:date-and-time
| +--rw elapsed-time? uint32
| +--rw suspect-status? Boolean
| +--rw forward-available? yang:gauge32
| +--rw backward-available? yang:gauge32
| +--rw forward-unavailable? yang:gauge32
| +--rw backward-unavailable? yang:gauge32
+--rw history-stats* [id]
+--rw id uint32
+--rw start-time? yang:date-and-time
+--rw elapsed-time? uint32
+--rw suspect-status? boolean
+--rw forward-available? yang:gauge32
+--rw backward-available? yang:gauge32
+--rw forward-unavailable? yang:gauge32
+--rw backward-unavailable? yang:gauge32
rpcs:
+---x create-loss-measurement
| +--ro input
| | +--rw measurement-type
| | | +--rw slm? boolean
| | | +--rw pm_1sl? boolean
| | +--rw enabled-counters
Wang, et al. Expires May 31, 2016 [Page 11]
Internet-Draft Gen OAM PM Model November 2015
| | | +--rw availability-forward-high-loss? boolean
| | | +--rw availability-forward-availables? boolean
| | | +--rw availability-forward-unavailable? boolean
| | | +--rw availability-backward-high-loss? boolean
| | | +--rw availability-backward-consecutive-high-loss? boolean
| | | +--rw availability-backward-available? boolean
| | | +--rw available-backward-unavailable? boolean
| | +--ro message-period? uint32
| | +--ro data-pattern? enumeration
| | +--ro measurement-interval? uint32
| | +--ro number-intervals-stored? uint32
| | +--ro session-type? enumeration
| | +--ro start-time
| | | +--ro (start-time)?
| | | +--:(immediate)
| | | | +--ro immediate!
| | | +--:(absolute)
| | | +--ro absolute? yang:date-and-time
| | +--ro stop-time
| | | +--ro (stop-time)?
| | | +--:(none)
| | | | +--ro none!
| | | +--:(absolute)
| | | +--ro absolute? yang:date-and-time
| | +--ro destination-mep
| | +--ro (mp-address)?
| | | +--:(mac-address)
| | | | +--ro mac-address? yang:mac-address
| | | +--:(ipv4-address)
| | | | +--ro ipv4-address? inet:ipv4-address
| | | +--:(ipv6-address)
| | | +--ro ipv6-address? inet:ipv6-address
| | +--ro (MEP-ID)?
| | | +--:(MEP-ID-int)
| | | +--ro MEP-ID-int? int32
| | +--ro MEP-ID-format? identityref
| +--ro output
| +--ro session-id uint32
+---x abort-loss-measurement
| +--ro input
| +--ro technology identityref
| +--ro MD-name-string MD-name-string
| +--ro MA-name-string? MA-name-string
| +--ro destination-mep
| | +--ro (mp-address)?
| | | +--:(mac-address)
| | | | +--ro mac-address? yang:mac-address
| | | +--:(ipv4-address)
Wang, et al. Expires May 31, 2016 [Page 12]
Internet-Draft Gen OAM PM Model November 2015
| | | | +--ro ipv4-address? inet:ipv4-address
| | | +--:(ipv6-address)
| | | +--ro ipv6-address? inet:ipv6-address
| | +--ro (MEP-ID)?
| | | +--:(MEP-ID-int)
| | | +--ro MEP-ID-int? int32
| | +--ro MEP-ID-format? identityref
| +--ro session-id uint32
+---x create-delay-measurement
| +--ro input
| | +--ro measurement-type
| | | +--ro dmm? boolean
| | | +--ro dm1-transmitted? boolean
| | | +--ro dm1-received? boolean
| | +--ro measurement-enable
| | +--ro message-period? uint32
| | +--ro data-pattern? enumeration
| | +--ro measurement-interval? uint32
| | +--ro number-intervals-stored? uint32
| | +--ro session-type? enumeration
| | +--ro start-time
| | | +--ro (start-time)?
| | | +--:(immediate)
| | | | +--ro immediate!
| | | +--:(absolute)
| | | +--ro absolute? yang:date-and-time
| | +--ro stop-time
| | | +--ro (stop-time)?
| | | +--:(none)
| | | | +--ro none!
| | | +--:(absolute)
| | | +--ro absolute? yang:date-and-time
| | +--ro destination-mep
| | | +--ro (mp-address)?
| | | | +--:(mac-address)
| | | | | +--ro mac-address? yang:mac-address
| | | | +--:(ipv4-address)
| | | | | +--ro ipv4-address? inet:ipv4-address
| | | | +--:(ipv6-address)
| | | | +--ro ipv6-address? inet:ipv6-address
| | | +--ro (MEP-ID)?
| | | | +--:(MEP-ID-int)
| | | | +--ro MEP-ID-int? int32
| | | +--ro MEP-ID-format? identityref
| | +--ro (flow-entropy)?
| | +--:(flow-entropy-null)
| | +--ro flow-entropy-null empty
| +--ro output
Wang, et al. Expires May 31, 2016 [Page 13]
Internet-Draft Gen OAM PM Model November 2015
| +--ro session-id uint32
+---x abort-delay-measurement
+--ro input
+--ro technology identityref
+--ro MD-name-string MD-name-string
+--ro MA-name-string? MA-name-string
+--ro destination-mep
| +--ro (mp-address)?
| | +--:(mac-address)
| | | +--ro mac-address? yang:mac-address
| | +--:(ipv4-address)
| | | +--ro ipv4-address? inet:ipv4-address
| | +--:(ipv6-address)
| | +--ro ipv6-address? inet:ipv6-address
| +--ro (MEP-ID)?
| | +--:(MEP-ID-int)
| | +--ro MEP-ID-int? int32
| +--ro MEP-ID-format? identityref
+--ro session-id uint32
data hierarchy of PM
5. PM YANG Module
<CODE BEGINS> file "ietf-gen-oam-pm.yang"
module ietf-gen-oam-pm {
namespace "urn:ietf:params:xml:ns:yang:ietf-gen-oam-pm";
prefix goampm;
import ietf-gen-oam {
prefix goam;
}
import ietf-yang-types {
prefix yang;
}
organization
"IETF LIME (Layer Independent OAM Management in Multi-Layer
Environment) Working Group";
contact
"zitao wang: wangzitao@huawei.com";
description
"This YANG module defines generic loss measurement and
delay measurement configuration for multi-layer OAM
Wang, et al. Expires May 31, 2016 [Page 14]
Internet-Draft Gen OAM PM Model November 2015
management to be used within IETF in a protocol independent
manner.";
revision 2015-01-07 {
description
"Initial revision.";
reference "draft-wang-lime-yang-pm";
}
/* features */
feature loss-measurements {
description
"This feature indicates that the server supports
configuration of loss measurement that is used by some OAM
protocols.
Servers that do not advertise this feature will not
configure loss measurement";
}
feature delay-measurements {
description
"This feature indicates that the server supports
configuration of delay measurement that is used by some OAM
protocols.
Servers that do not advertise this feature will not
configure delay measurement";
}
feature create-loss-measurement{
description
"This feature indicates that the server supports executing
the create-loss-measurement OAM command and returning a
response. Servers that do not advertise this feature will
not support execution of the create-loss-measurement command
or the RPC model for the create-loss-measurement command.";
}
feature abort-loss-measurement{
description
"This feature indicates that the server supports executing
the abort-loss-measurement OAM command and returning a
response. Servers that do not advertise this feature will
not support execution of the abort-loss-measurement command
or the RPC model for the abort-loss-measurement command.";
}
Wang, et al. Expires May 31, 2016 [Page 15]
Internet-Draft Gen OAM PM Model November 2015
feature create-delay-measurement{
description
"This feature indicates that the server supports executing
the create-delay-measurement OAM command and returning a
response. Servers that do not advertise this feature will
not support execution of the create-delay-measurement
command or the RPC model for the create-delay-measurement
command.";
}
feature abort-delay-measurement{
description
"This feature indicates that the server supports executing
the abort-delay-measurement OAM command and returning a
response. Servers that do not advertise this feature will
not support execution of the abort-delay-measurement
command or the RPC model for the abort-delay-measurement
command.";
}
grouping loss-measurement-configuration-group {
description
"This grouping includes configuration objects for the loss
measurement function defined in GEN-PM.";
reference
"draft-wang-lime-yang-pm";
container measurement-type {
leaf slm {
type boolean;
description
"If true, generate PM SLM Messages and correlate with
received SLR responses.";
}
leaf pm_1sl{
type boolean;
description
"If true, generate PM 1SL Messages.";
}
description
"This object specifies what type of loss measurement
will be performed.";
}
container enabled-counters {
leaf availability-forward-high-loss {
type boolean;
Wang, et al. Expires May 31, 2016 [Page 16]
Internet-Draft Gen OAM PM Model November 2015
default "false";
description
"Enable (true) or disable availability-forward-high-loss
counters found in the current-stats and history-stats.";
}
leaf availability-forward-available {
type boolean;
default "false";
description
"Enable (true) or disable availability-forward-available
counters found in the current-stats and history-stats ";
}
leaf availability-forward-unavailable {
type boolean;
default "false";
description
"Enable (true) or disable
availability-forward-unavailable counters found in the
current-stats and history-stats ";
}
leaf availability-backward-high-loss {
type boolean;
default "false";
description
"Enable (true) or disable availability-backward-high-loss
counters found in the current-stats and history-stats ";
}
leaf availability-backward-consecutive-high-loss {
type boolean;
default "false";
description
"Enable (true) or disable
availability-backward-consecutive-high-loss counters
found in the current-stats and history-stats ";
}
leaf availability-backward-available {
type boolean;
default "false";
description
"Enable (true) or disable availability-backward-available
counters found in the current-stats and history-stats ";
}
leaf availability-backward-unavailable {
type boolean;
default "false";
description
"Enable (true) or disable available-backward-unavailable
Wang, et al. Expires May 31, 2016 [Page 17]
Internet-Draft Gen OAM PM Model November 2015
counters found in the current-stats and history-stats ";
}
description
"Indicates the types of PM loss measurement counters found
in the current-stats and history-stats that are enabled.
Not all counters are supported for all PM Loss Measurement
types.";
}
/* This terminates the enabled-counters clause */
leaf message-period {
type uint32;
units "ms";
default 1000;
description
"This object specifies the interval between loss
measurement OAM message transmissions.";
}
leaf data-pattern {
type enumeration {
enum zeroes {
description "Indicates the Data TLV contains all 0s.";
}
enum ones {
description "Indicates the Data TLV contains all 1s.";
}
}
default zeroes;
description
"This object specifies the loss measurement data pattern
included in the OAM Message.";
}
leaf measurement-interval {
type uint32;
units "minutes";
default 15;
description
"This object specifies a measurement interval in
minutes. Measurements are accumulated in the current-stats
counters for the duration of this interval, and then
transferred to the history-stats counters.";
}
leaf number-intervals-stored {
Wang, et al. Expires May 31, 2016 [Page 18]
Internet-Draft Gen OAM PM Model November 2015
type uint32 {
range "2..10";
}
default 10;
description
"This object specifies the number of completed
measurement intervals to store in the history statistics
table.";
}
leaf availability-measurement-interval {
type uint32 {
range "1..525600";
}
units minutes;
default 15;
description
"This object specifies the availability measurement
interval in minutes. Measurement interval of 15 minutes
MUST be supported, other intervals can be supported.";
}
leaf availability-consecutive-intervals-number {
type uint32 {
range "1..1000";
}
default 10;
description
"This object specifies a configurable number of
consecutive availability indicators to be used to
determine a change in the availability status as
indicated by MEF 10.2.1.
This parameter is equivalent to the Availability
parameter 'n' as specified by MEF 10.2.1. The number
range of 1 through 10 MUST be supported. The number
range of 1 through 1000 may be supported, but is not
mandatory.";
}
leaf session-type {
type enumeration {
enum proactive {
description
"The current session is 'proactive'.";
}
enum on-demand {
description
Wang, et al. Expires May 31, 2016 [Page 19]
Internet-Draft Gen OAM PM Model November 2015
"The current session is on-demand.";
}
}
description
"This object indicates whether the current session is
defined to be proactive or on-demand.";
}
list thresholds {
key "id";
description
"This list contains the list of Loss Measurement
configuration threshold values for LM Performance
Monitoring. The main purpose of the threshold
configuration list is to configure threshold alarm
notifications indicating that a specific performance
metric is not being met.";
leaf id {
type uint32;
description
"The index of the threshold number for the specific LM
threshold entry. An index value of '1' MUST be
supported. Other index values can also be supported.";
}
container enabled-thresholds {
leaf forward-unavailable-count {
type boolean;
description
"If true, indicates that the forward-unavailable-count
is available.";
}
leaf forward-available-ratio {
type boolean;
description
"If true, indicates that the forward-available-ratio
is available.";
}
leaf backward-unavailable-count {
type boolean;
description
"If true, indicates that the backward-unavailable-count
is available.";
}
leaf backward-available-ratio {
type boolean;
description
Wang, et al. Expires May 31, 2016 [Page 20]
Internet-Draft Gen OAM PM Model November 2015
"If true, indicates that the backward-available-ratio
is available.";
}
description
"A container that indicates the type of OAM loss
measurement threshold notifications that are enabled.";
}
/* Terminates container enabled-thresholds */
leaf forward-unavailable-count {
type uint32;
description
"This object is used to set the forward unavailability
threshold value that will be used to determine if a
threshold notification is generated.";
}
leaf backward-unavailable-count {
type uint32;
description
"This object is used to set the backward unavailability
threshold value that will be used to determine if a
threshold notification is generated.";
}
leaf forward-available-ratio {
type uint32 {
range "0..100000";
}
units milli-percent;
default 0;
description
"This object is used to set the forward
availability/total time ratio threshold value that will
be used to determine if a threshold notification is
generated if the ratio drops below the configured value.
The ratio value is expressed as a percent with a value
of 0 (ratio 0.00) through 100000 (ratio 1.00) Units are
in milli-percent, where 1 indicates 0.001 percent.";
}
leaf backward-available-ratio {
type uint32 {
range "0..100000";
}
units milli-percent;
default 0;
description
"This object is used to set the backward
availability/total time ratio threshold value that will
Wang, et al. Expires May 31, 2016 [Page 21]
Internet-Draft Gen OAM PM Model November 2015
be used to determine if a thresh-old notification is
generated if the ratio drops below the configured value.
The ratio value is expressed as a percent with a value
of 0 (ratio 0.00) through 100000 (ratio 1.00) Units are
in milli-percent, where 1 indicates 0.001 percent.";
}
}
/* This terminates list thresholds */
}
/* This terminates loss-measurement-configuration-group */
grouping loss-stats-group {
description
"This grouping includes statistics objects for a loss
measurement session.";
leaf suspect-status {
type boolean;
description
"true means statistics for this measurement interval are
not valid.";
}
}
grouping measurement-timing-group {
description
"This grouping includes objects used for proactive and
on-demand scheduling of PM measurement sessions.";
container start-time {
description
"This container defines the session start time.";
choice start-time {
description
"Measurement session start time can be immediate,
relative, or absolute.";
container immediate {
description
"Start the measurement session immediately.";
}
leaf relative {
type yang:timeticks;
description
"This object specifies the relative start time.";
}
leaf absolute {
Wang, et al. Expires May 31, 2016 [Page 22]
Internet-Draft Gen OAM PM Model November 2015
type yang:date-and-time;
description
"This object specifies the scheduled start time to
perform the on-demand monitoring operations.";
}
}
}
container stop-time {
description
"This container defines the session stop time.";
choice stop-time {
description
"Measurement session stop time can be none, or
absolute.";
container none {
description
"Never end the measurement session.";
}
leaf absolute {
type yang:date-and-time;
description
"This object specifies the scheduled stop time
to perform the on-demand monitoring operations.";
}
}
}
}
/* End of measurement-timing-group */
grouping delay-measurement-configuration-group {
description
"This grouping includes configuration objects for Delay
Measurement function defined in PM.";
reference
"draft-wang-lime-yang-pm";
container measurement-type {
description
"This container defines the measurement type.";
leaf dmm {
type boolean;
description
"If true, generate DMM Message, correlate with DMR
Wang, et al. Expires May 31, 2016 [Page 23]
Internet-Draft Gen OAM PM Model November 2015
responses.";
}
leaf dm1-transmitted {
type boolean;
description
"If true, generate 1DM Message.";
}
leaf dm1-received {
type boolean;
description
"Receive 1DM PDU and generate measurement.";
}
}
container measurement-enable {
description
"Indicates the types of DM counters that are enabled. Not
all DM counters are supported for all DM types.";
}
leaf message-period {
type uint32;
default 100;
description
"This object specifies the interval between delay
measurement OAM message transmissions.";
}
leaf data-pattern {
type enumeration {
enum zeroes {
description "Indicates the Data TLV contains all 0s.";
}
enum ones {
description "Indicates the Data TLV contains all 1s.";
}
}
default zeroes;
description
"This object specifies the delay measurement data pattern
included in the OAM packet.";
}
leaf measurement-interval {
type uint32;
units minutes;
default 15;
Wang, et al. Expires May 31, 2016 [Page 24]
Internet-Draft Gen OAM PM Model November 2015
description
"This object specifies a Measurement Interval in minutes.";
}
leaf number-intervals-stored {
type uint32 {
range "2..10";
}
default 10;
description
"This object specifies the number of completed measurement
intervals to store in the history statistics table.";
}
leaf session-type {
type enumeration {
enum proactive {
description
"The current session is 'proactive'.";
}
enum on-demand {
description
"The current session is on-demand.";
}
}
description
"This object indicates whether the current session is
defined to be proactive or on-demand.";
}
}
/* End of delay-measurement-configuration-group */
grouping delay-measurement-stats-group {
description
"This grouping includes statistics objects for a delay
measurement session.";
leaf suspect-status {
type boolean;
description
"true means statistics for this measurement interval are
not valid.";
}
}
/* End of delay-measurement-stats-group */
/*This set of data definitions defines the role of MEP.*/
augment "/goam:domains/goam:domain"
Wang, et al. Expires May 31, 2016 [Page 25]
Internet-Draft Gen OAM PM Model November 2015
+"/goam:MAs/goam:MA/goam:MEP" {
description
"This set of data definitions extends the MEP as described
in goam";
leaf delay-responder {
type boolean;
default true;
description
"This object specifies whether Delay Measurement (DMM)
single ended Responder is enabled. The value 'false'
indicates the Delay measurement responder is disabled
and received DMM will be discarded.";
}
leaf loss-responder {
type boolean;
default true;
description
"This object specifies whether Loss Measurement (LMM)
single ended Responder is enabled. The value 'false'
indicates the Loss measurement responder is disabled and
received LMM will be discarded.";
}
}
/*This set of data definitions defines performance measurement */
/*configuration.*/
augment "/goam:domains/goam:domain"
+"/goam:MAs/goam:MA/goam:MEP" {
description
"This set of data definitions extends the MEP as described
in goam, specially with regard to delay measurements.";
container delay-measurements {
if-feature delay-measurements;
description
"This container contains a collection of data
definitions related to Delay Measurements as defined
in PM.";
list delay-measurements {
key "session-cookie";
config false;
description
"List of Delay Measurement PM Sessions where each
instance is uniquely identified by an session-cookie
Wang, et al. Expires May 31, 2016 [Page 26]
Internet-Draft Gen OAM PM Model November 2015
attribute.";
leaf session-cookie {
type uint32;
config false;
description
"cookie to identify delay measurement session.";
}
leaf id {
type string;
description
"This object uniquely identifies a scheduled
measurement time.";
}
leaf status {
type boolean;
config false;
description
"This object indicates DM session status, true means
active, false means not active.";
}
}
/* End of list delay-measurements */
uses delay-measurement-configuration-group;
uses measurement-timing-group;
container current-stats {
description
"This container contains result of the current
Measurement Interval in a delay measurement
session gathered during the interval indicated by
measurement-interval.";
leaf start-time {
type yang:date-and-time;
description
"Start time for current measurement interval.";
}
leaf elapsed-time {
type uint32;
units "tens of ms";
description
"Elapsed time for current measurement interval in
0.01 seconds.";
Wang, et al. Expires May 31, 2016 [Page 27]
Internet-Draft Gen OAM PM Model November 2015
}
uses delay-measurement-stats-group;
}
/* End of current-stats */
list history-stats {
key id;
description
"This list contains the result for historic measurement
intervals for performance measurement session.";
leaf id {
type uint32;
description
"This id can be used to identify different history
stats.";
}
leaf start-time {
type yang:date-and-time;
description
"Start time for measurement interval.";
}
leaf elapsed-time {
type uint32;
units "tens of ms";
description
"Elapsed time for measurement interval in 0.01
seconds.";
}
uses delay-measurement-stats-group;
}
/* End of history-stats */
}
/* End of container delay-measurements */
}
/* End of augment clause */
augment "/goam:domains/goam:domain"
+"/goam:MAs/goam:MA/goam:MEP" {
description
"This set of data definitions extends the MEP as described
in goam, specially with regards to loss measurements.";
container loss-measurements {
Wang, et al. Expires May 31, 2016 [Page 28]
Internet-Draft Gen OAM PM Model November 2015
if-feature loss-measurements;
description
"This container contains a collection of data definitions
related to loss measurements as defined in this document.";
list loss-measurements {
key "session-cookie";
config false;
description
"List of Loss Measurement PM Sessions where each
instance is uniquely identified by an session-cookie
attribute.";
leaf session-cookie {
type uint32;
config false;
description
"Cookie to identify loss measurement session.";
}
leaf id {
type string;
description
"This object uniquely identifies a scheduled measurement
time.";
}
leaf status {
type boolean;
config false;
description
"This object indicates loss measurement session status,
true means active, false means not active.";
}
}
/* End of list loss-measurements */
uses loss-measurement-configuration-group;
uses measurement-timing-group;
leaf availability-forward-status {
type enumeration {
enum available {
description
"Indicates the MEP is available.";
}
enum unavailable {
description
Wang, et al. Expires May 31, 2016 [Page 29]
Internet-Draft Gen OAM PM Model November 2015
"Indicates the MEP is unavailable.";
}
enum unknown {
description
"Indicates the availability is not known.";
}
}
description
"This object indicates the availability status in the
forward direction.";
}
leaf availability-backward-status {
type enumeration {
enum available {
description
"Indicates the MEP is available.";
}
enum unavailable {
description
"Indicates the MEP is unavailable.";
}
enum unknown {
description
"Indicates the availability is not known.";
}
}
description
"This object indicates the availability status
in the backward direction.";
}
container current-stats {
description
"This container contains result of the current
measurement interval in a PM loss measurement session
gathered during the interval indicated by
measurement-interval.";
leaf start-time {
type yang:date-and-time;
description
"Start time for current measurement interval.";
}
leaf elapsed-time {
type uint32;
units "tens of ms";
description
Wang, et al. Expires May 31, 2016 [Page 30]
Internet-Draft Gen OAM PM Model November 2015
"Elapsed time for current measurement
interval in 0.01 seconds.";
}
leaf forward-available {
type yang:gauge32;
description
"The current value of forward-available for the
referenced loss measurement session.";
}
leaf backward-available {
type yang:gauge32;
description
"The current value of backward-available for the
referenced loss measurement session.";
}
leaf forward-unavailable {
type yang:gauge32;
description
"The current value of forward-unavailable for the
referenced loss measurement session.";
}
leaf backward-unavailable {
type yang:gauge32;
description
"The current value of backward-unavailable for the
referenced loss measurement session.";
}
uses loss-stats-group;
}
/* End of container current-stats */
list history-stats {
key id;
description
"This list contains the result for historic measurement
intervals for PM loss measurement session.";
leaf id {
type uint32;
description
"This leaf can be used to select different
history-stats intervals.";
}
leaf start-time {
type yang:date-and-time;
description
"Start time for measurement interval.";
Wang, et al. Expires May 31, 2016 [Page 31]
Internet-Draft Gen OAM PM Model November 2015
}
leaf elapsed-time {
type uint32;
units "tens of ms";
description
"Elapsed time for measurement interval in 0.01
seconds.";
}
leaf forward-available {
type yang:gauge32;
description
"The value of forward-available for the
referenced loss measurement session and interval.";
}
leaf backward-available {
type yang:gauge32;
description
"The value of backward-available for the
referenced loss measurement session and interval.";
}
leaf forward-unavailable {
type yang:gauge32;
description
"The value of forward-unavailable for the
referenced loss measurement session and interval.";
}
leaf backward-unavailable {
type yang:gauge32;
description
"The value of backward-unavailable for the
referenced loss measurement session and interval.";
}
uses loss-stats-group;
}
/* End of list history-stats */
}
/* End of container loss-measurements */
}
/* End of augments clause */
//RPCs related to Generic PM
rpc create-loss-measurement {
if-feature create-loss-measurement;
description
"Schedule a one-way or two-way on-demand or proactive
performance monitoring loss measurement session on a specific
MEP and flow.
Wang, et al. Expires May 31, 2016 [Page 32]
Internet-Draft Gen OAM PM Model November 2015
A list entry associated with the newly created session will be
created in the loss-measurements container and the assigned
session identifier will be returned in the output parameter.";
input {
uses loss-measurement-configuration-group;
uses measurement-timing-group;
container destination-mep {
uses goam:mp-address;
uses goam:MEP-ID;
description
"destination mep";
}
}
output {
leaf session-id {
type uint32;
mandatory true;
description
"The session identifier of the newly created loss
measurement session.";
}
}
} //end of rpc
rpc abort-loss-measurement {
if-feature abort-delay-measurement;
description
"Abort a currently running or scheduled single-ended
on-demand PM loss measurement function.";
input {
uses goam:maintenance-domain-id;
uses goam:ma-identifier;
container destination-mep {
uses goam:mp-address;
uses goam:MEP-ID;
description
"destination mep";
}
leaf session-id {
type uint32;
mandatory true;
description
"The session Id of the measurement session to
be aborted.";
Wang, et al. Expires May 31, 2016 [Page 33]
Internet-Draft Gen OAM PM Model November 2015
}
}
} //end of RPC
rpc create-delay-measurement {
if-feature create-delay-measurement;
description
"Schedule a one-way or two-way on-demand or proactive
performance monitoring delay measurement session on a
specific MEP and flow. A list entry associated with the
newly created session will be created in the
delay-measurements container and the assigned session
identifier will be returned in the output parameter.";
input {
uses delay-measurement-configuration-group;
uses measurement-timing-group;
container destination-mep {
uses goam:mp-address;
uses goam:MEP-ID;
description
"description mep.";
}
uses goam:flow-entropy;
}
output {
leaf session-id {
type uint32;
mandatory true;
description
"The session identifier of the newly created
delay measurement session.";
}
}
} //end of rpc
rpc abort-delay-measurement {
if-feature abort-delay-measurement;
description
"Abort a currently running or scheduled single-ended
on-demand PM function.";
input {
uses goam:maintenance-domain-id;
uses goam:ma-identifier;
Wang, et al. Expires May 31, 2016 [Page 34]
Internet-Draft Gen OAM PM Model November 2015
container destination-mep {
uses goam:mp-address;
uses goam:MEP-ID;
description
"destination mep";
}
leaf session-id {
type uint32;
mandatory true;
description
"The session Id of the measurement session to
be aborted.";
}
}
} //end of RPC
}
<CODE ENDS>
6. Security Considerations
TBD.
7. IANA Considerations
TBD.
8. References
8.1. Normative References
[GENYANGGOAM]
Senevirathne , T. and Q. Wu, "Generic YANG Data Model for
Operations, Administration, and Maintenance (OAM)", ID
http://tools.ietf.org/html/
draft-tissa-lime-yang-oam-management-04, April 2015.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<http://www.rfc-editor.org/info/rfc2119>.
8.2. Informative References
[IEEE802.1Q]
"Media Access Control (MAC) Bridges and Virtual Bridged
Local Area Networks", IEEE Std 802.1Q-2011, August 2011.
Wang, et al. Expires May 31, 2016 [Page 35]
Internet-Draft Gen OAM PM Model November 2015
Authors' Addresses
Zitao Wang
Huawei Technologies,Co.,Ltd
101 Software Avenue, Yuhua District
Nanjing 210012
China
Email: wangzitao@huawei.com
Qin Wu
Huawei
101 Software Avenue, Yuhua District
Nanjing, Jiangsu 210012
China
Email: bill.wu@huawei.com
Deepak Kumar
CISCO Systems
510 McCarthy Blvd
Milpitas, CA 95035
USA
Email: dekumar@cisco.com
Tom Taylor
PT Taylor Consulting
Ottawa
Canada
Email: tom.taylor.stds@gmail.com
Wang, et al. Expires May 31, 2016 [Page 36]
