Internet DRAFT - draft-xu-v6ops-dslite-redundancy
draft-xu-v6ops-dslite-redundancy
Internet Engineering Task Force H. Xu
Internet-Draft Q. Sun
Intended status: Informational China Telecom
Expires: March 1, 2018 Y. Fu
CNNIC
August 28, 2017
A Redundancy Mechanism for Dual-Stack Lite
draft-xu-v6ops-dslite-redundancy-01
Abstract
Dual-Stack Lite is a solution to offer both IPv4 and IPv6
connectivity to customers that are addressed only with an IPv6
prefix. This document provide a redundancy mechanism for Dual-Stack
Lite.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on March 1, 2018.
Copyright Notice
Copyright (c) 2017 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
Xu, et al. Expires March 1, 2018 [Page 1]
Internet-Draft draft-xu-v6ops-dslite-redundancy-01 August 2017
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Requirements Language . . . . . . . . . . . . . . . . . . . . 3
3. Reliability Considerations of AFTR . . . . . . . . . . . . . 3
4. The Redundancy Machanism Overview . . . . . . . . . . . . . . 4
5. The difference between the software process of the BRAS . . . 5
6. New requirements for the AFTR device . . . . . . . . . . . . 8
7. Security Considerations . . . . . . . . . . . . . . . . . . . 9
8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 9
9. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 9
10. References . . . . . . . . . . . . . . . . . . . . . . . . . 9
10.1. Normative References . . . . . . . . . . . . . . . . . . 9
10.2. Informative References . . . . . . . . . . . . . . . . . 10
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 10
1. Introduction
Dual-Stack Lite [RFC6333] is a solution to offer both IPv4 and IPv6
connectivity to customers crossing an IPv6 only infrastructure. The
internet service provider no longer to provide publice IPv4 address
but an IPv6 prefix to the customers as the issue of the IPv4 public
address shortage. One of its key components is an IPv4-over-IPv6
tunnel, which is used to provide IPv4 connectivity across a service
provider's IPv6 network. Another key component is a carrier-grade
IPv4-IPv4 Network Address Translation (NAT) to share service provider
IPv4 addresses among customers. As the exhaustion of the public IPv4
address, service providers have deployed DS-Lite in their network
widely in nowadays, where a large number of customers are located.
These customers within a network which is served by a single CGN
function embedded in AFTR element may experience service degradation
due to the presence of the single point of failure or loss of state
information. Therefore, redundancy capabilities of the AFTR devices
are strongly desired in order to deliver highly available services to
customers. Failure detection and repair time should be therefore
shortened.
This document describes a redundancy mechanism for DS-Lite. Some
deployment consideration and recommendations for network elements are
also provided.
Xu, et al. Expires March 1, 2018 [Page 2]
Internet-Draft draft-xu-v6ops-dslite-redundancy-01 August 2017
2. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
[RFC2119] when they appear in ALL CAPS. When these words are not in
ALL CAPS (such as "should" or "Should"), they have their usual
English meanings, and are not to be interpreted as [RFC2119] key
words.
3. Reliability Considerations of AFTR
As described in [RFC6908], for the robustness, reliability, and load
distribution purposes, operators may deploy multiple AFTRs in their
network. There are many deployment mechanism for the AFTR in ISP
network, the most common type are distribution mode and
centralization mode.
For the distribution mode, the CGN card is integrated into the free
slot of the BRAS in a metro network. As the BRAS integrates the AFTR
function of DS-lite, it provides DS-Lite connection service for a
small area customers in this metro network. The service providers
always integrated two CGN cards in the BRAS for reduncdancy
consideration as the primary AFTR and backup AFTR.The capital cost of
this mode is expensive because it always need two CGN cards for every
BRAS. But 50 percent of these cards are idle most of time so that it
is a big waste of money. There are various types and versions of
BRAS have been deployed in the service provider's network . Some of
them have been used for over ten years and may not support the card
insertion. Some of them may also don't have free slot for the CGN
card. It is not operational to replace all of them in a short period
which result that it could deploy DS-Lite in some area and others can
not in the same metro network.
For the centralization mode, a stand-alone AFTR device is deployed
nearby the core router device at the exit of a metro network. It
provides the DS-Lite connection service for the whole customers in
this metro network. Service providers always deploy two stand-alone
AFTR devices nearby the two core router device for the load
distribution and redundancy purpose. The capital cost of this mode
is more less than the distribution mode. It does not consume the
slot resource of the BRAS. But it takes a big chanllenge for AFTR
device for this mode in the large scale metro network because it
takes performance requirements for the speed of the session creation
and the maximum number of session maintenance. On the other side, it
will create exta traffic when the users belong to the same BRAS are
conmmunicating with eath other because it will connect to the AFTR
device in the centralization mode first. It is a waste of bandwidth.
Xu, et al. Expires March 1, 2018 [Page 3]
Internet-Draft draft-xu-v6ops-dslite-redundancy-01 August 2017
As described above, whether to use distribution mode or
centralization mode depends on the trade-off between the investment
and operational efficiency requirement of the service providers.
4. The Redundancy Machanism Overview
The fundamental principle of redundacncy machanism is to make the
centralization mode to backup for the distribution mode. The
architecture of the redundancy mechanism is illustrated as Figure 1.
It deploys one AFTR card into every BRAS which surport card insertion
in metro network, as to provide bassic distributed DS-Lite connection
service. Moreover, it deploy two stand-alone AFTR device near the
core router at the exit of the metro network. So it could provide
the DS-lite connection service for the users of the BRAS which don't
surpport card insertion and don't have free slot for the AFTR card.
One advantage of this mechanism is that the stand-alone AFTR device
is not only a redundancy device but also can provide DS-Lite
conection service for the BRAS without AFTR card slot. Then the IGP
routing would be configured on the BRAS which has the AFTR card
insertion.
Xu, et al. Expires March 1, 2018 [Page 4]
Internet-Draft draft-xu-v6ops-dslite-redundancy-01 August 2017
+-------+ +-------+
| IPv4 | | IPv6 |
| APP | | APP |
+---+---+ +----+--+
| X |
| / \ |
+---+--+ +---+---+
| | | |
| CR +---+ CR |
|(AFTR)| | (AFTR)|
+---+--+ +----+--+
| \ / |
| X |
+---+---+ +----+--+
| | | |
| BRAS | | BRAS |
| (AFTR)| | |
| | | |
+---+---+ +----+--+
| |
+---+---+ +----+--+
| | | |
| B4 | | B4 |
| | | |
+-------+ +-------+
Figure 1: The architecture of the redunancy mechanism
It is made that the routing prior selected to the AFTR card on the
BRAS and then selected the AFTR stand-alone device near the core
router through the Metric value configuration.As the metric values of
the two stand-alone AFTR device in centralization mode are the same,
it ensure that the traffic of the same session would be forwarded to
the same centralized AFTR device by the random selection of the hash
algorithm.This mechanism is based on the IPv6 anycast function: when
the AFTR card in distribution mode is breakdown,the AFTR address in
router advertise message will disappear in the IGP routing table.The
IP address of AFTR device in centralization mode is becoming the
optimal routing. All the traffic for DS-Lite will be directed to the
AFTR decive in the centralization mode as to keep the application
alive.
5. The difference between the software process of the BRAS
The software process of the BRAS for distribution mode is described
as Figure 2
Xu, et al. Expires March 1, 2018 [Page 5]
Internet-Draft draft-xu-v6ops-dslite-redundancy-01 August 2017
----------
/// \\\
// \\
| The traffic for |
| IPv6 is flow into |
| the inbound card |
\\ //
\\\ ///
-----+----
|
+-----------+-----------+
| Decapsulation for |
| PPP |
+------------+----------+
|
+------------+----------+
| Look for IPv6 FIB |
+-----------|-----------+
---|-----
/// \\\
/ \ +-----------------+
| Whether the AFTR | Y | |
| Card Breakdown? -----| PPP Session |
\ / | Interruption |
\\\ /// | |
---|----- +------|----------+
N | |
+--------------------+ +-----------------+
| The local AFTR | | |
| decapsulated | | The DS-Lite |
| the packets from | | Service are |
| the IPv6 tunnel | | Terminated |
+--------|-----------+ +-----------------+
|
+--------|-----------+
| NAT44 |
+--------|-----------+
|
+--------|-----------+
| Look for IPv4 FIB |
+---------|----------+
---|-----
/// \\\
/ \
| The traffic for |
| IPv4 flow out to |
| the outbound |
| card |
Xu, et al. Expires March 1, 2018 [Page 6]
Internet-Draft draft-xu-v6ops-dslite-redundancy-01 August 2017
\ /
\\\ ///
---------
Figure 2: The software process of the BRAS for distribution mode
And the software process of the BRAS for the new machanism is
described as Figure 3:
----------
/// \\\
// \\
| The traffic for |
| IPv6 is flow into |
| the inbound card |
\\ //
\\\ ///
-----+----
|
+-----------+-----------+
| Decapsulation for |
| PPP |
+------------+----------+
|
+------------+----------+
| Look for IPv6 FIB |
+-----------|-----------+
|
---|-----
/// \\\
/ \ +-----------------+
| Whether the AFTR | Y | The traffic for |
| Card Breakdown? -----| IPv6 flow are |
\ / | out to the |
\\\ /// | outbound card |
---|----- +------|----------+
N | |
+--------------------+ +------------------+
| The local AFTR | | |
| decapsulated | | The centralized |
| the packets from | | AFTR decapsulated|
| the IPv6 tunnel | | the packets from |
+--------|-----------+ | the IPv6 tunnel |
| | |
+--------|-----------+ +------|-----------+
| NAT44 | |
+--------|-----------+ +------|-----------+
| | |
Xu, et al. Expires March 1, 2018 [Page 7]
Internet-Draft draft-xu-v6ops-dslite-redundancy-01 August 2017
+--------|-----------+ | NAT44 |
| Look for IPv4 FIB | +------|-----------+
+---------|----------+ |
| +------|-----------+
---|----- | |
/// \\\ | Look for IPv4 FIB|
/ \ +------|-----------+
| The traffic for | |
| IPv4 flow out to | |
| the outbound | |
| card | |
\ / /-|-------\
\\\ /// //// \\\\
--------- | The traffic for |
| IPv4 flow out to |
| the outbound |
\\\\ card ////
\---------/
Figure 3: The software process of the BRAS for new mechanism
As compared between Figure 2 and Figure 3, the main difference for
the new mechanism is that if the local AFTR card breakdown, the DS-
Lite service can be maintained as the backup AFTR will take over the
function to keep the application alive.
6. New requirements for the AFTR device
For this DS-Lite redundancy mechanism, there are some new
requirements for the AFTR device as below:
1. If the ditribution AFTR card breakdown, the AFTR device SHOULD
ensure that the traffic will not direct to the other distribution
AFTR card.
2. It should use FQDN to decribe the AFTR in the DHCPv6 option as
described in [RFC6334].
3. How many ditribution AFTR device could be covered by one
centralization AFTR device will be different depends on the
deployment by different ISPs.
4. The speed of the session creation for the centralized AFTR device
could be calculated by a formula.
Xu, et al. Expires March 1, 2018 [Page 8]
Internet-Draft draft-xu-v6ops-dslite-redundancy-01 August 2017
7. Security Considerations
The AFTR device of centralization mode will accept the tunnel request
from the all DS-Lite users in the metro network. It needs aditional
requirements to prevent from the spoofing attack.
1. Only the user passed the authentication could be assigned IPv6
prefix from the BRAS.
2. After assigned the IPv6 prefix to the authorized user, the BRAS
will report this address to the AAA sever for recording.
3. Create a local database in the AFTR device of he centralized mode
to record the IPv6 prefix of the authorized user.
4. Create an interface of the AAA sever for the AFTR device to
synchrionize the IPv6 prefix of the authorized user between the
AAA sever to the local database of the AFTR.
5. When the BRAS receive a new request for a new tunnel, it will
compare with the source IPv6 prefix with the local database of
the AFTR. If it is match, it will accept the request for tunnel.
If not, it will ignore the request regarding it is from a illegal
user and report the illegal address to the network management
system.
6. If the authorized user offline, BRAS will ask the AAA server to
delete this user from the database.
8. IANA Considerations
This draft does not request any IANA action.
9. Acknowledgements
The authors would like to thanks the valuable comments made by XXX
and other members of v6ops WG.
This document was produced using the xml2rfc tool [RFC2629].
10. References
10.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997, <https://www.rfc-
editor.org/info/rfc2119>.
Xu, et al. Expires March 1, 2018 [Page 9]
Internet-Draft draft-xu-v6ops-dslite-redundancy-01 August 2017
[RFC6333] Durand, A., Droms, R., Woodyatt, J., and Y. Lee, "Dual-
Stack Lite Broadband Deployments Following IPv4
Exhaustion", RFC 6333, DOI 10.17487/RFC6333, August 2011,
<https://www.rfc-editor.org/info/rfc6333>.
[RFC6334] Hankins, D. and T. Mrugalski, "Dynamic Host Configuration
Protocol for IPv6 (DHCPv6) Option for Dual-Stack Lite",
RFC 6334, DOI 10.17487/RFC6334, August 2011,
<https://www.rfc-editor.org/info/rfc6334>.
10.2. Informative References
[RFC2629] Rose, M., "Writing I-Ds and RFCs using XML", RFC 2629,
DOI 10.17487/RFC2629, June 1999, <https://www.rfc-
editor.org/info/rfc2629>.
[RFC6908] Lee, Y., Maglione, R., Williams, C., Jacquenet, C., and M.
Boucadair, "Deployment Considerations for Dual-Stack
Lite", RFC 6908, DOI 10.17487/RFC6908, March 2013,
<https://www.rfc-editor.org/info/rfc6908>.
Authors' Addresses
Honglei Xu
China Telecom
No.118 Xizhimennei street, Xicheng District
Beijing, 100035
P.R. China
Email: xuhl.bri@chinatelecom.cn
Qiong Sun
China Telecom
No.118 Xizhimennei street, Xicheng District
Beijing 100035
P.R. China
Email: sunqiong.bri@chinatelecom.cn
Yu Fu
CNNIC
No.4 South 4th Street, Zhongguancun
Hai-Dian District, Beijing, 100190
P.R. China
Email: fuyu@cnnic.cn
Xu, et al. Expires March 1, 2018 [Page 10]