Internet DRAFT - draft-zhou-ippm-ioam-yang
draft-zhou-ippm-ioam-yang
IPPM T. Zhou, Ed.
Internet-Draft Huawei
Intended status: Standards Track J. Guichard
Expires: January 31, 2021 Futurewei
F. Brockners
S. Raghavan
Cisco Systems
July 30, 2020
A YANG Data Model for In-Situ OAM
draft-zhou-ippm-ioam-yang-08
Abstract
In-situ Operations, Administration, and Maintenance (IOAM) records
operational and telemetry information in user packets while the
packets traverse a path between two points in the network. This
document defines a YANG module for the IOAM function.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on January 31, 2021.
Copyright Notice
Copyright (c) 2020 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
Zhou, Ed., et al. Expires January 31, 2021 [Page 1]
Internet-Draft YANG Model for IOAM July 2020
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Conventions used in this document . . . . . . . . . . . . . . 2
2.1. Tree Diagrams . . . . . . . . . . . . . . . . . . . . . . 3
3. Design of the IOAM YANG Data Model . . . . . . . . . . . . . 3
3.1. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 3
3.2. Preallocated Tracing Profile . . . . . . . . . . . . . . 5
3.3. Incremental Tracing Profile . . . . . . . . . . . . . . . 5
3.4. Direct Export Profile . . . . . . . . . . . . . . . . . . 6
3.5. Proof of Transit Profile . . . . . . . . . . . . . . . . 6
3.6. Edge to Edge Profile . . . . . . . . . . . . . . . . . . 7
4. IOAM YANG Module . . . . . . . . . . . . . . . . . . . . . . 7
5. Security Considerations . . . . . . . . . . . . . . . . . . . 21
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 22
7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 22
8. References . . . . . . . . . . . . . . . . . . . . . . . . . 22
8.1. Normative References . . . . . . . . . . . . . . . . . . 23
8.2. Informative References . . . . . . . . . . . . . . . . . 24
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 24
1. Introduction
In-situ Operations, Administration, and Maintenance (IOAM)
[I-D.ietf-ippm-ioam-data] records OAM information within user packets
while the packets traverse a network. The data types and data
formats for IOAM data records have been defined in
[I-D.ietf-ippm-ioam-data]. The IOAM data can be embedded in many
protocol encapsulations such as Network Services Header (NSH) and
IPv6.
This document defines a data model for IOAM capabilities using the
YANG data modeling language [RFC7950]. This YANG model supports all
the five IOAM options, which are Incremental Tracing Option, Pre-
allocated Tracing Option, Direct Export
Option[I-D.ietf-ippm-ioam-direct-export], Proof of Transit(PoT)
Option, and Edge-to-Edge Option.
2. Conventions used in this document
The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
Zhou, Ed., et al. Expires January 31, 2021 [Page 2]
Internet-Draft YANG Model for IOAM July 2020
BCP14, [RFC2119], [RFC8174] when, and only when, they appear in all
capitals, as shown here.
The following terms are defined in [RFC7950] and are used in this
specification:
o augment
o data model
o data node
The terminology for describing YANG data models is found in
[RFC7950].
2.1. Tree Diagrams
Tree diagrams used in this document follow the notation defined in
[RFC8340].
3. Design of the IOAM YANG Data Model
3.1. Profiles
The IOAM model is organized as list of profiles as shown in the
following figure. Each profile associates with one flow and the
corresponding IOAM information.
Zhou, Ed., et al. Expires January 31, 2021 [Page 3]
Internet-Draft YANG Model for IOAM July 2020
module: ietf-ioam
+--rw ioam
+--rw ioam-profiles
+--rw admin-config
| +--rw enabled? boolean
+--rw ioam-profile* [profile-name]
+--rw profile-name string
+--rw filter
| +--rw filter-type? ioam-filter-type
| +--rw acl-name? -> /acl:acls/acl/name
+--rw protocol-type? ioam-protocol-type
+--rw incremental-tracing-profile {incremental-trace}?
| ...
+--rw preallocated-tracing-profile {preallocated-trace}?
| ...
+--rw direct-export-profile {direct-export}?
| ...
+--rw pot-profile {proof-of-transit}?
| ...
+--rw e2e-profile {edge-to-edge}?
...
The "enabled" is an administrative configuration. When it is set to
true, IOAM configuration is enabled for the system. Meanwhile, the
IOAM data-plane functionality is enabled.
The "filter" is used to identify a flow, where the IOAM profile can
apply. There may be multiple filter types. ACL [RFC8519] is the
default one.
The IOAM data can be encapsulated into multiple protocols, e.g., IPv6
[I-D.ietf-ippm-ioam-ipv6-options] and NSH [I-D.ietf-sfc-ioam-nsh].
The "protocol-type" is used to indicate where the IOAM is applied.
For example, if the "protocol-type" is IPv6, the IOAM ingress node
will encapsulate the associated flow with the IPv6-IOAM
[I-D.ietf-ippm-ioam-ipv6-options] format.
IOAM data includes five encapsulation types, i.e., incremental
tracing data, preallocated tracing data, direct export data, prove of
transit data and end to end data. In practice, multiple IOAM data
types can be encapsulated into the same IOAM header. The "ioam-
profile" contains a set of sub-profiles, each of which relates to one
encapsulation type. The configured object may not support all the
sub-profiles. The supported sub-profiles are indicated by 5 defined
features, i.e., "incremental-trace", "preallocated-trace", "direct
export", "proof-of-transit", "edge-to-edge".
Zhou, Ed., et al. Expires January 31, 2021 [Page 4]
Internet-Draft YANG Model for IOAM July 2020
3.2. Preallocated Tracing Profile
The IOAM tracing data is expected to be collected at every node that
a packet traverses to ensure visibility into the entire path a packet
takes within an IOAM domain. The preallocated tracing option will
create pre-allocated space for each node to populate its information
. The "preallocated-tracing-profile" contains the detailed
information for the preallocated tracing data. The information
includes:
o enabled: indicates whether the preallocated tracing profile is
enabled.
o node-action: indicates the operation (e.g., encapsulate IOAM
header, transit the IOAM data, or decapsulate IOAM header) applied
to the dedicated flow.
o use-namespace: indicate the namespace used for the trace types.
o trace-type: indicates the per-hop data to be captured by the IOAM
enabled nodes and included in the node data list.
o Loopback mode is used to send a copy of a packet back towards the
source.
o Active mode indicates that a packet is used for active
measurement.
+--rw preallocated-tracing-profile {preallocated-trace}?
+--rw enabled? boolean
+--rw node-action? ioam-node-action
+--rw trace-types
| +--rw use-namespace? ioam-namespace
| +--rw trace-type* ioam-trace-type
+--rw enable-loopback-mode? boolean
+--rw enable-active-mode? boolean
3.3. Incremental Tracing Profile
The incremental tracing option contains a variable node data fields
where each node allocates and pushes its node data immediately
following the option header. The "incremental-tracing-profile"
contains the detailed information for the incremental tracing data.
The detailed information is the same as the Preallocated Tracing
Profile, but with one more variable, "max-length", which restricts
the length of the IOAM header.
Zhou, Ed., et al. Expires January 31, 2021 [Page 5]
Internet-Draft YANG Model for IOAM July 2020
+--rw incremental-tracing-profile {incremental-trace}?
+--rw enabled? boolean
+--rw node-action? ioam-node-action
+--rw trace-types
| +--rw use-namespace? ioam-namespace
| +--rw trace-type* ioam-trace-type
+--rw enable-loopback-mode? boolean
+--rw enable-active-mode? boolean
+--rw max-length? uint32
3.4. Direct Export Profile
The direct export option is used as a trigger for IOAM nodes to
export IOAM data to a receiving entity (or entities). The "direct-
export-profile" contains the detailed information for the direct
export data. The detailed information is the same as the
Preallocated Tracing Profile, but with one more optional variable,
"flow-id", which is used to correlate the exported data of the same
flow from multiple nodes and from multiple packets.
+--rw direct-export-profile {direct-export}?
+--rw enabled? boolean
+--rw node-action? ioam-node-action
+--rw trace-types
| +--rw use-namespace? ioam-namespace
| +--rw trace-type* ioam-trace-type
+--rw enable-loopback-mode? boolean
+--rw enable-active-mode? boolean
+--rw flow-id? uint32
3.5. Proof of Transit Profile
The IOAM Proof of Transit data is to support the path or service
function chain verification use cases. The "pot-profile" contains
the detailed information for the prove of transit data. The detailed
information are described in [I-D.ietf-sfc-proof-of-transit].
Zhou, Ed., et al. Expires January 31, 2021 [Page 6]
Internet-Draft YANG Model for IOAM July 2020
+--rw pot-profile {proof-of-transit}?
+--rw enabled? boolean
+--rw active-profile-index? pot:profile-index-range
+--rw pot-profile-list* [pot-profile-index]
+--rw pot-profile-index profile-index-range
+--rw prime-number uint64
+--rw secret-share uint64
+--rw public-polynomial uint64
+--rw lpc uint64
+--rw validator? boolean
+--rw validator-key? uint64
+--rw bitmask? uint64
+--rw opot-masks
+--rw downstream-mask* uint64
+--rw upstream-mask* uint64
3.6. Edge to Edge Profile
The IOAM edge to edge option is to carry data that is added by the
IOAM encapsulating node and interpreted by IOAM decapsulating node.
The "e2e-profile" contains the detailed information for the edge to
edge data. The detailed information includes:
o enabled: indicates whether the edge to edge profile is enabled.
o node-action is the same semantic as in Section 2.2.
o use-namespace: indicate the namespace used for the edge to edge
types.
o e2e-type indicates data to be carried from the ingress IOAM node
to the egress IOAM node.
+--rw e2e-profile {edge-to-edge}?
+--rw enabled? boolean
+--rw node-action? ioam-node-action
+--rw e2e-types
+--rw use-namespace? ioam-namespace
+--rw e2e-type* ioam-e2e-type
4. IOAM YANG Module
<CODE BEGINS> file "ietf-ioam@2020-07-13.yang"
module ietf-ioam {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-ioam";
prefix "ioam";
Zhou, Ed., et al. Expires January 31, 2021 [Page 7]
Internet-Draft YANG Model for IOAM July 2020
import ietf-pot-profile {
prefix "pot";
reference "draft-ietf-sfc-proof-of-transit";
}
import ietf-access-control-list {
prefix "acl";
reference
"RFC 8519: YANG Data Model for Network Access Control
Lists (ACLs)";
}
organization
"IETF IPPM (IP Performance Metrics) Working Group";
contact
"WG Web: <http://tools.ietf.org/wg/ippm>
WG List: <ippm@ietf.org>
Editor: zhoutianran@huawei.com
Editor: james.n.guichard@futurewei.com
Editor: fbrockne@cisco.com
Editor: srihari@cisco.com";
description
"This YANG module specifies a vendor-independent data
model for the In Situ OAM (IOAM).
Copyright (c) 2020 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see the
RFC itself for full legal notices.";
revision 2020-07-13 {
description "Initial revision.";
reference "draft-zhou-ippm-ioam-yang";
}
/*
* FEATURES
*/
Zhou, Ed., et al. Expires January 31, 2021 [Page 8]
Internet-Draft YANG Model for IOAM July 2020
feature incremental-trace
{
description
"This feature indicated that the incremental tracing option is
supported";
reference "draft-ietf-ippm-ioam-data";
}
feature preallocated-trace
{
description
"This feature indicated that the preallocated tracing option is
supported";
reference "draft-ietf-ippm-ioam-data";
}
feature direct-export
{
description
"This feature indicated that the direct export option is
supported";
reference "ietf-ippm-ioam-direct-export";
}
feature proof-of-transit
{
description
"This feature indicated that the proof of transit option is
supported";
reference "draft-ietf-ippm-ioam-data";
}
feature edge-to-edge
{
description
"This feature indicated that the edge to edge option is
supported";
reference "draft-ietf-ippm-ioam-data";
}
/*
* IDENTITIES
*/
identity base-filter {
description
"Base identity to represent a filter. A filter is used to
specify the flow to apply the IOAM profile. ";
}
Zhou, Ed., et al. Expires January 31, 2021 [Page 9]
Internet-Draft YANG Model for IOAM July 2020
identity acl-filter {
base base-filter;
description
"Apply ACL rules to specify the flow.";
}
identity base-protocol {
description
"Base identity to represent the carrier protocol. It's used to
indicate what layer and protocol the IOAM data is embedded.";
}
identity ipv6-protocol {
base base-protocol;
description
"The described IOAM data is embedded in IPv6 protocol.";
reference "ietf-ippm-ioam-ipv6-options";
}
identity nsh-protocol {
base base-protocol;
description
"The described IOAM data is embedded in NSH.";
reference "ietf-sfc-ioam-nsh";
}
identity base-node-action {
description
"Base identity to represent the node actions. It's used to
indicate what action the node will take.";
}
identity action-encapsulate {
base base-node-action;
description
"indicate the node is to encapsulate the IOAM packet";
}
identity action-transit {
base base-node-action;
description
"indicate the node is to transit the IOAM packet";
}
identity action-decapsulate {
base base-node-action;
description
"indicate the node is to decapsulate the IOAM packet";
Zhou, Ed., et al. Expires January 31, 2021 [Page 10]
Internet-Draft YANG Model for IOAM July 2020
}
identity base-trace-type {
description
"Base identity to represent trace types";
}
identity trace-hop-lim-node-id {
base base-trace-type;
description
"indicates presence of Hop_Lim and node_id in the
node data.";
}
identity trace-if-id {
base base-trace-type;
description
"indicates presence of ingress_if_id and egress_if_id in the
node data.";
}
identity trace-timestamp-seconds {
base base-trace-type;
description
"indicates presence of time stamp seconds in the node data.";
}
identity trace-timestamp-nanoseconds {
base base-trace-type;
description
"indicates presence of time stamp nanoseconds in the node data.";
}
identity trace-transit-delay {
base base-trace-type;
description
"indicates presence of transit delay in the node data.";
}
identity trace-namespace-data {
base base-trace-type;
description
"indicates presence of namespace specific data (short format)
in the node data.";
}
identity trace-queue-depth {
base base-trace-type;
Zhou, Ed., et al. Expires January 31, 2021 [Page 11]
Internet-Draft YANG Model for IOAM July 2020
description
"indicates presence of queue depth in the node data.";
}
identity trace-opaque-state-snapshot {
base base-trace-type;
description
"indicates presence of variable length Opaque State Snapshot
field.";
}
identity trace-hop-lim-node-id-wide {
base base-trace-type;
description
"indicates presence of Hop_Lim and node_id wide in the
node data.";
}
identity trace-if-id-wide {
base base-trace-type;
description
"indicates presence of ingress_if_id and egress_if_id wide in
the node data.";
}
identity trace-namespace-data-wide {
base base-trace-type;
description
"indicates presence of namespace specific data in wide format
in the node data.";
}
identity trace-buffer-occupancy {
base base-trace-type;
description
"indicates presence of buffer occupancy in the node data.";
}
identity trace-checksum-complement {
base base-trace-type;
description
"indicates presence of the Checksum Complement node data.";
}
identity base-pot-type {
description
"Base identity to represent Proof of Transit(PoT) types";
}
Zhou, Ed., et al. Expires January 31, 2021 [Page 12]
Internet-Draft YANG Model for IOAM July 2020
identity pot-bytes-16 {
base base-pot-type;
description
"POT data is a 16 Octet field.";
}
identity base-e2e-type {
description
"Base identity to represent e2e types";
}
identity e2e-seq-num-64 {
base base-e2e-type;
description
"indicates presence of a 64-bit sequence number";
}
identity e2e-seq-num-32 {
base base-e2e-type;
description
"indicates presence of a 32-bit sequence number";
}
identity e2e-timestamp-seconds {
base base-e2e-type;
description
"indicates presence of timestamp seconds for the
transmission of the frame";
}
identity e2e-timestamp-subseconds {
base base-e2e-type;
description
"indicates presence of timestamp subseconds for the
transmission of the frame";
}
identity base-namespace {
description
"Base identity to represent the namespace";
}
identity namespace-ietf {
base base-namespace;
description
"namespace that specified in IETF.";
}
Zhou, Ed., et al. Expires January 31, 2021 [Page 13]
Internet-Draft YANG Model for IOAM July 2020
/*
* TYPE DEFINITIONS
*/
typedef ioam-filter-type {
type identityref {
base base-filter;
}
description
"Specifies a known type of filter.";
}
typedef ioam-protocol-type {
type identityref {
base base-protocol;
}
description
"Specifies a known type of carrier protocol for the IOAM data.";
}
typedef ioam-node-action {
type identityref {
base base-node-action;
}
description
"Specifies a known type of node action.";
}
typedef ioam-trace-type {
type identityref {
base base-trace-type;
}
description
"Specifies a known trace type.";
}
typedef ioam-pot-type {
type identityref {
base base-pot-type;
}
description
"Specifies a known pot type.";
}
typedef ioam-e2e-type {
type identityref {
base base-e2e-type;
}
Zhou, Ed., et al. Expires January 31, 2021 [Page 14]
Internet-Draft YANG Model for IOAM July 2020
description
"Specifies a known e2e type.";
}
typedef ioam-namespace {
type identityref {
base base-namespace;
}
description
"Specifies the supported namespace.";
}
/*
* GROUP DEFINITIONS
*/
grouping ioam-filter {
description "A grouping for IOAM filter definition";
leaf filter-type {
type ioam-filter-type;
description "filter type";
}
leaf acl-name {
when "../filter-type = 'ioam:acl-filter'";
type leafref {
path "/acl:acls/acl:acl/acl:name";
}
description "Access Control List name.";
}
}
grouping encap-tracing {
description
"A grouping for the generic configuration for
tracing profile.";
container trace-types {
description
"the list of trace types for encapsulate";
leaf use-namespace {
type ioam-namespace;
description
"the namespace used for the encapsulation";
}
Zhou, Ed., et al. Expires January 31, 2021 [Page 15]
Internet-Draft YANG Model for IOAM July 2020
leaf-list trace-type {
type ioam-trace-type;
description
"The trace type is only defined at the encapsulation node.";
}
}
leaf enable-loopback-mode {
type boolean;
default false;
description
"Loopback mode is used to send a copy of a packet back towards
the source. The loopback mode is only defined at the
encapsulation node.";
}
leaf enable-active-mode {
type boolean;
default false;
description
"Active mode indicates that a packet is used for active
measurement. An IOAM decapsulating node that receives a
packet with the Active flag set in one of its Trace options
must terminate the packet.";
}
}
grouping ioam-incremental-tracing-profile {
description
"A grouping for incremental tracing profile.";
leaf node-action {
type ioam-node-action;
description "node action";
}
uses encap-tracing {
when "node-action = 'ioam:action-encapsulate'";
}
leaf max-length {
when "../node-action = 'ioam:action-encapsulate'";
type uint32;
description
"This field specifies the maximum length of the node data list
in octets. The max-length is only defined at the
encapsulation node. And it's only used for the incremental
tracing mode.";
Zhou, Ed., et al. Expires January 31, 2021 [Page 16]
Internet-Draft YANG Model for IOAM July 2020
}
}
grouping ioam-preallocated-tracing-profile {
description
"A grouping for incremental tracing profile.";
leaf node-action {
type ioam-node-action;
description "node action";
}
uses encap-tracing {
when "node-action = 'ioam:action-encapsulate'";
}
}
grouping ioam-direct-export-profile {
description
"A grouping for direct export profile.";
leaf node-action {
type ioam-node-action;
description "node action";
}
uses encap-tracing {
when "node-action = 'ioam:action-encapsulate'";
}
leaf flow-id {
when "../node-action = 'ioam:action-encapsulate'";
type uint32;
description
"flow-id is used to correlate the exported data of the same
flow from multiple nodes and from multiple packets.";
}
}
grouping ioam-e2e-profile {
description
"A grouping for end to end profile.";
leaf node-action {
type ioam-node-action;
description
"indicate how the node act for this profile";
Zhou, Ed., et al. Expires January 31, 2021 [Page 17]
Internet-Draft YANG Model for IOAM July 2020
}
container e2e-types {
when "../node-action = 'ioam:action-encapsulate'";
description
"the list of e2e types for encapsulate";
leaf use-namespace {
type ioam-namespace;
description
"the namespace used for the encapsulation";
}
leaf-list e2e-type {
type ioam-e2e-type;
description
"The e2e type is only defined at the encapsulation node.";
}
}
}
grouping ioam-admin-config {
description
"IOAM top-level administrative configuration.";
leaf enabled {
type boolean;
default false;
description
"When true, IOAM configuration is enabled for the system.
Meanwhile, the IOAM data-plane functionality is enabled.";
}
}
/*
* DATA NODES
*/
container ioam {
description "IOAM top level container";
container ioam-profiles {
description
"Contains a list of IOAM profiles.";
container admin-config {
description
"Contains all the administrative configurations related to
Zhou, Ed., et al. Expires January 31, 2021 [Page 18]
Internet-Draft YANG Model for IOAM July 2020
the IOAM functionalities and all the IOAM profiles.";
uses ioam-admin-config;
}
list ioam-profile {
key "profile-name";
ordered-by user;
description
"A list of IOAM profiles that configured on the node.";
leaf profile-name {
type string;
mandatory true;
description
"Unique identifier for each IOAM profile";
}
container filter {
uses ioam-filter;
description
"The filter which is used to indicate the flow to apply
IOAM.";
}
leaf protocol-type {
type ioam-protocol-type;
description
"This item is used to indicate the carrier protocol where
the IOAM is applied.";
}
container incremental-tracing-profile {
if-feature incremental-trace;
description
"describe the profile for incremental tracing option";
leaf enabled {
type boolean;
default false;
description
"When true, apply incremental tracing option to the
specified flow identified by the filter.";
}
uses ioam-incremental-tracing-profile;
}
Zhou, Ed., et al. Expires January 31, 2021 [Page 19]
Internet-Draft YANG Model for IOAM July 2020
container preallocated-tracing-profile {
if-feature preallocated-trace;
description
"describe the profile for preallocated tracing option";
leaf enabled {
type boolean;
default false;
description
"When true, apply preallocated tracing option to the
specified flow identified by the following filter.";
}
uses ioam-preallocated-tracing-profile;
}
container direct-export-profile {
if-feature direct-export;
description
"describe the profile for direct-export option";
leaf enabled {
type boolean;
default false;
description
"When true, apply direct-export option to the
specified flow identified by the following filter.";
}
uses ioam-direct-export-profile;
}
container pot-profile {
if-feature proof-of-transit;
description
"describe the profile for PoT option";
leaf enabled {
type boolean;
default false;
description
"When true, apply Proof of Transit option to the
specified flow identified by the following filter.";
}
leaf active-profile-index {
type pot:profile-index-range;
description
Zhou, Ed., et al. Expires January 31, 2021 [Page 20]
Internet-Draft YANG Model for IOAM July 2020
"Proof of transit profile index that is currently
active. Will be set in the first hop of the path
or chain. Other nodes will not use this field.";
}
uses pot:pot-profile;
}
container e2e-profile {
if-feature edge-to-edge;
description
"describe the profile for e2e option";
leaf enabled {
type boolean;
default false;
description
"When true, apply End to end option to the
specified flow identified by the following filter.";
}
uses ioam-e2e-profile;
}
}
}
}
}
<CODE ENDS>
5. Security Considerations
The YANG module specified in this document defines a schema for data
that is designed to be accessed via network management protocols such
as NETCONF [RFC6241] or RESTCONF [RFC8040]. The lowest NETCONF layer
is the secure transport layer, and the mandatory-to-implement secure
transport is Secure Shell (SSH) [RFC6242]. The lowest RESTCONF layer
is HTTPS, and the mandatory-to-implement secure transport is TLS
[RFC5246].
The NETCONF access control model [RFC6536] provides the means to
restrict access for particular NETCONF or RESTCONF users to a
preconfigured subset of all available NETCONF or RESTCONF protocol
operations and content.
There are a number of data nodes defined in this YANG module that are
writable/creatable/deletable (i.e., config true, which is the
default). These data nodes may be considered sensitive or vulnerable
in some network environments. Write operations (e.g., edit-config)
Zhou, Ed., et al. Expires January 31, 2021 [Page 21]
Internet-Draft YANG Model for IOAM July 2020
to these data nodes without proper protection can have a negative
effect on network operations. These are the subtrees and data nodes
and their sensitivity/vulnerability:
o /ioam/ioam-profiles/admin-config
The items in the container above include the top level administrative
configurations related to the IOAM functionalities and all the IOAM
profiles. Unexpected changes to these items could lead to the IOAM
function disruption and/ or misbehavior of all the IOAM profiles.
o /ioam/ioam-profiles/ioam-profile
The entries in the list above include the whole IOAM profile
configurations which indirectly create or modify the device
configurations. Unexpected changes to these entries could lead to
the mistake of the IOAM behavior for the corresponding flows.
6. IANA Considerations
RFC Ed.: In this section, replace all occurrences of 'XXXX' with the
actual RFC number (and remove this note).
IANA is requested to assign a new URI from the IETF XML Registry
[RFC3688]. The following URI is suggested:
URI: urn:ietf:params:xml:ns:yang:ietf-ioam
Registrant Contact: The IESG.
XML: N/A; the requested URI is an XML namespace.
This document also requests a new YANG module name in the YANG Module
Names registry [RFC7950] with the following suggestion:
name: ietf-ioam
namespace: urn:ietf:params:xml:ns:yang:ietf-ioam
prefix: ioam
reference: RFC XXXX
7. Acknowledgements
For their valuable comments, discussions, and feedback, we wish to
acknowledge Greg Mirsky, Reshad Rahman and Tom Petch.
8. References
Zhou, Ed., et al. Expires January 31, 2021 [Page 22]
Internet-Draft YANG Model for IOAM July 2020
8.1. Normative References
[I-D.ietf-ippm-ioam-data]
Brockners, F., Bhandari, S., and T. Mizrahi, "Data Fields
for In-situ OAM", draft-ietf-ippm-ioam-data-10 (work in
progress), July 2020.
[I-D.ietf-ippm-ioam-direct-export]
Song, H., Gafni, B., Zhou, T., Li, Z., Brockners, F.,
Bhandari, S., Sivakolundu, R., and T. Mizrahi, "In-situ
OAM Direct Exporting", draft-ietf-ippm-ioam-direct-
export-00 (work in progress), February 2020.
[I-D.ietf-sfc-proof-of-transit]
Brockners, F., Bhandari, S., Mizrahi, T., Dara, S., and S.
Youell, "Proof of Transit", draft-ietf-sfc-proof-of-
transit-06 (work in progress), June 2020.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
DOI 10.17487/RFC3688, January 2004,
<https://www.rfc-editor.org/info/rfc3688>.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246,
DOI 10.17487/RFC5246, August 2008,
<https://www.rfc-editor.org/info/rfc5246>.
[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
and A. Bierman, Ed., "Network Configuration Protocol
(NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
<https://www.rfc-editor.org/info/rfc6241>.
[RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure
Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
<https://www.rfc-editor.org/info/rfc6242>.
[RFC6536] Bierman, A. and M. Bjorklund, "Network Configuration
Protocol (NETCONF) Access Control Model", RFC 6536,
DOI 10.17487/RFC6536, March 2012,
<https://www.rfc-editor.org/info/rfc6536>.
Zhou, Ed., et al. Expires January 31, 2021 [Page 23]
Internet-Draft YANG Model for IOAM July 2020
[RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
RFC 7950, DOI 10.17487/RFC7950, August 2016,
<https://www.rfc-editor.org/info/rfc7950>.
[RFC8040] Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
<https://www.rfc-editor.org/info/rfc8040>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8340] Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams",
BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018,
<https://www.rfc-editor.org/info/rfc8340>.
[RFC8519] Jethanandani, M., Agarwal, S., Huang, L., and D. Blair,
"YANG Data Model for Network Access Control Lists (ACLs)",
RFC 8519, DOI 10.17487/RFC8519, March 2019,
<https://www.rfc-editor.org/info/rfc8519>.
8.2. Informative References
[I-D.ietf-ippm-ioam-ipv6-options]
Bhandari, S., Brockners, F., Pignataro, C., Gredler, H.,
Leddy, J., Youell, S., Mizrahi, T., Kfir, A., Gafni, B.,
Lapukhov, P., Spiegel, M., Krishnan, S., and R. Asati,
"In-situ OAM IPv6 Options", draft-ietf-ippm-ioam-
ipv6-options-02 (work in progress), July 2020.
[I-D.ietf-sfc-ioam-nsh]
Brockners, F. and S. Bhandari, "Network Service Header
(NSH) Encapsulation for In-situ OAM (IOAM) Data", draft-
ietf-sfc-ioam-nsh-04 (work in progress), June 2020.
Authors' Addresses
Tianran Zhou
Huawei
156 Beiqing Rd.
Beijing 100095
China
Email: zhoutianran@huawei.com
Zhou, Ed., et al. Expires January 31, 2021 [Page 24]
Internet-Draft YANG Model for IOAM July 2020
Jim Guichard
Futurewei
United States of America
Email: james.n.guichard@futurewei.com
Frank Brockners
Cisco Systems
Hansaallee 249, 3rd Floor
Duesseldorf, Nordrhein-Westfalen 40549
Germany
Email: fbrockne@cisco.com
Srihari Raghavan
Cisco Systems
Tril Infopark Sez, Ramanujan IT City
Neville Block, 2nd floor, Old Mahabalipuram Road
Chennai, Tamil Nadu 600113
India
Email: srihari@cisco.com
Zhou, Ed., et al. Expires January 31, 2021 [Page 25]