rfc4575
Network Working Group J. Rosenberg
Request for Comments: 4575 Cisco Systems
Category: Standards Track H. Schulzrinne
Columbia University
O. Levin, Ed.
Microsoft Corporation
August 2006
A Session Initiation Protocol (SIP)
Event Package for Conference State
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2006).
Abstract
This document defines a conference event package for tightly coupled
conferences using the Session Initiation Protocol (SIP) events
framework, along with a data format used in notifications for this
package. The conference package allows users to subscribe to a
conference Uniform Resource Identifier (URI). Notifications are sent
about changes in the membership of this conference and optionally
about changes in the state of additional conference components.
Rosenberg, et al. Standards Track [Page 1]
RFC 4575 Conference Package August 2006
Table of Contents
1. Introduction ....................................................4
2. Terminology .....................................................4
3. Conference Event Package ........................................4
3.1. Event Package Name .........................................5
3.2. Filtering ..................................................5
3.3. Subscription Duration ......................................5
3.4. NOTIFY Bodies ..............................................5
3.5. Notifier Processing of SUBSCRIBE Requests ..................6
3.6. Notifier Generation of NOTIFY Requests .....................6
3.7. Subscriber Processing of NOTIFY Requests ...................6
3.8. Handling of Forked Requests ................................7
3.9. Rate of Notifications ......................................7
3.10. State Agents ..............................................7
4. Conference Document .............................................7
4.1. Format .....................................................7
4.2. Namespace ..................................................7
4.3. Versioning .................................................8
4.4. Partial Notifications Mechanism ............................8
4.5. Element Keys ...............................................9
4.6. Constructing Coherent State Procedure ......................9
5. Conference Data ................................................11
5.1. Overview ..................................................11
5.2. <conference-info> .........................................13
5.3. <conference-description> ..................................14
5.3.1. <conf-uris> ........................................14
5.3.2. <service-uris> .....................................15
5.3.3. <maximum-user-count> ...............................16
5.3.4. <available-media> ..................................16
5.4. <host-info> ...............................................17
5.4.1. <display-text> .....................................17
5.4.2. <web-page> .........................................17
5.4.3. <uris> .............................................17
5.5. <conference-state> ........................................17
5.5.1. <user-count> .......................................17
5.5.2. <active> ...........................................18
5.5.3. <locked> ...........................................18
5.6. <users> and Its <user> Sub-elements .......................18
5.6.1. <display-text> .....................................19
5.6.2. <associated-aors> ..................................19
5.6.3. <roles> ............................................19
5.6.4. <languages> ........................................19
5.6.5. <cascaded-focus> ...................................19
5.6.6. <endpoint> .........................................20
5.7. <endpoint> ................................................20
5.7.1. <display-text> .....................................20
5.7.2. <referred> .........................................21
Rosenberg, et al. Standards Track [Page 2]
RFC 4575 Conference Package August 2006
5.7.3. <status> ...........................................21
5.7.4. <joining-method> ...................................22
5.7.5. <joining-info> .....................................23
5.7.6. <disconnection-method> .............................23
5.7.7. <disconnection-info> ...............................23
5.7.8. <media> ............................................24
5.7.9. <call-info> ........................................24
5.8. <media> ...................................................24
5.8.1. <display-text> .....................................25
5.8.2. <type> .............................................25
5.8.3. <label> ............................................25
5.8.4. <src-id> ...........................................25
5.8.5. <status> ...........................................26
5.9. Sidebars ..................................................26
5.9.1. <sidebars-by-ref> ..................................26
5.9.2. <sidebar-by-val> ...................................26
6. XML Schema .....................................................26
7. Examples .......................................................35
7.1. Basic Example .............................................35
7.2. Rich Example ..............................................36
8. Security Considerations ........................................40
8.1. Connection Security .......................................40
8.2. Authorization Considerations ..............................41
9. IANA Considerations ............................................41
9.1. conference Event Package Registration .....................41
9.2. application/conference-info+xml MIME Registration .........42
9.3. URN Sub-Namespace Registration for ........................43
9.4. XML Schema Registration ...................................43
9.5. URI Purposes Sub-registry Establishment ...................44
10. Acknowledgements ..............................................45
11. References ....................................................45
11.1. Normative References .....................................45
11.2. Informative References ...................................46
Rosenberg, et al. Standards Track [Page 3]
RFC 4575 Conference Package August 2006
1. Introduction
The Session Initiation Protocol (SIP) events framework [10] defines
general mechanisms for subscribing to, and receiving notifications
of, events within SIP networks. It introduces the notion of a
package, which is a specific "instantiation" of the events framework
for a well-defined set of events. Here, we define a SIP event
package for tightly coupled conferences. This package can be used by
the conference notification service as outlined in the SIP
conferencing framework [16]. As described there, subscriptions to a
conference URI are routed to the focus that is handling the
conference. It acts as the notifier and provides clients with
updates on conference state.
The information provided by this package is comprised of conference
identifier(s), conference participants (optionally with their
statuses and media description), conference sidebars, conference
service URIs, etc.
2. Terminology
In this document, the key words "MUST", "MUST NOT", "REQUIRED",
"SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY",
and "OPTIONAL" are to be interpreted as described in RFC 2119 [1] and
indicate requirement levels for compliant implementations.
This document uses the conferencing terminology defined in
Conferencing Framework [16]. In addition, the "roster" term is used
to collectively refer to participants in a conference or a sub-
conference.
3. Conference Event Package
The conference event package allows a user to subscribe to the
information relating to a conference. In SIP, conferences are
represented by URIs. These URIs identify a SIP user agent (UA),
called a focus, that is responsible for ensuring that all users in
the conference can communicate with each other, as described in
Conferencing Framework [16]. The focus has sufficient information
about the state of the conference to inform subscribers about it.
It is possible that a participant in the conference may in fact be
another focus. In order to provide a more complete participant list,
the focus MAY subscribe to the conference package of the other focus
to discover the participant list in the cascaded conference. This
information can then be included in notifications by use of the
<cascaded-focus> element as specified by this package.
Rosenberg, et al. Standards Track [Page 4]
RFC 4575 Conference Package August 2006
This section provides the details for defining a SIP-specific event
notification package, as specified by RFC 3265 [10].
3.1. Event Package Name
The name of this event package is "conference". This package name is
carried in the Event and Allow-Events header, as defined in RFC 3265
[10].
3.2. Filtering
Filters, which can be applied to conference subscriptions, are a
desirable feature and can be considered as a subject of future
standardization activities. This document does not define the
filters for the conference package to be included in the SUBSCRIBE
body.
A SUBSCRIBE for a conference package, being sent without a body,
implies the default subscription filtering policy. The default
policy is as follows:
o Notifications are generated every time there is any change in the
state of the conference.
o Notifications do not normally contain full state; rather, they
only indicate the state that has changed. The exception is a
NOTIFY sent in response to a SUBSCRIBE. These NOTIFYs contain the
full state of the information requested by the subscriber.
3.3. Subscription Duration
The default expiration time for a subscription to a conference is one
hour. Once the conference ends, all subscriptions to that particular
conference are terminated, with a reason of "noresource" as defined
in RFC 3265 [10].
3.4. NOTIFY Bodies
According to RFC 3265 [10], the NOTIFY message will contain bodies
that describe the state of the subscribed resource. This body is in
a format listed in the Accept header field of the SUBSCRIBE, or a
package-specific default if the Accept header field was omitted from
the SUBSCRIBE.
In this event package, the body of the notification contains a
conference information document that describes the state of a
conference. All subscribers and notifiers MUST support the
"application/conference-info+xml" data format described in Sections 9
Rosenberg, et al. Standards Track [Page 5]
RFC 4575 Conference Package August 2006
and 5. By default, i.e., if no Accept header is specified to a
SUBSCRIBE request, the NOTIFY will contain a body in the
"application/conference-info+xml" data format. If the Accept header
field is present, it MUST include "application/conference-info+xml"
and MAY include any other types.
3.5. Notifier Processing of SUBSCRIBE Requests
The conference information contains very sensitive information.
Therefore, all subscriptions SHOULD be authenticated and then
authorized before approval. Authorization policy is at the
discretion of the administrator, as always.
However, it is RECOMMENDED that all users in the conference be
allowed to subscribe to the conference event package.
3.6. Notifier Generation of NOTIFY Requests
Notifications SHOULD be generated for the conference state when a new
participant joins (i.e., gets "connected" to) or a participant leaves
(i.e., gets "disconnected" from) the conference.
Subject to a local focus policy, additional changes in participants'
status, changes in their media types, and other optional information
MAY be reported by the focus.
Changes in sidebar rosters SHOULD be reported by the focus to their
participants and MAY be reported to others, subject to local policy.
Changes in conference identifiers and service URIs SHOULD be reported
by the focus to the conference package subscribers.
Changes in other conference state information MAY be reported by the
focus to the conference package subscribers.
3.7. Subscriber Processing of NOTIFY Requests
The SIP events framework expects packages to specify how a subscriber
processes NOTIFY requests in any package-specific ways, and in
particular, how it uses the NOTIFY requests to construct a coherent
view of the state of the subscribed resource.
Typically, the NOTIFY for the conference package will only contain
information about those users whose state in the conference has
changed. To construct a coherent view of the total state of all
users, a subscriber to the conference package will need to combine
NOTIFYs received over time.
Rosenberg, et al. Standards Track [Page 6]
RFC 4575 Conference Package August 2006
Notifications within this package can convey partial information;
that is, they can indicate information about a subset of the state
associated with the subscription. This means that an explicit
algorithm needs to be defined in order to construct coherent and
consistent state. The details of this mechanism are specific to the
particular document type. See Section 4.6 for information on
constructing coherent information from an application/
conference-info+xml document.
3.8. Handling of Forked Requests
By their nature, the conferences supported by this package are
centralized. Therefore, SUBSCRIBE requests for a conference should
not generally fork. If forking happens in the network, subscribers
to this package MUST NOT establish more than a single SIP dialog as a
result of a single SUBSCRIBE request. In the foci cascading case,
detailed conference information can be retrieved by establishing an
individual SUBSCRIBE dialog with each participating focus.
3.9. Rate of Notifications
For reasons of congestion control, it is important that the rate of
notifications not become excessive. As a result, it is RECOMMENDED
that the server does not generate notifications for a single
subscriber at a rate faster than once every 5 seconds.
3.10. State Agents
Conference state is ideally maintained in the element in which the
conference resides. Therefore, a conference focus is the best-suited
element to handle subscriptions to it. Cascaded foci MAY implement
state agents (as defined in RFC 3265 [10]) for this package.
4. Conference Document
4.1. Format
Conference information is an XML document that MUST be well-formed
and valid. It MUST be based on Extensible Markup Language (XML) 1.0
and MUST be encoded using UTF-8 [14].
4.2. Namespace
This specification makes use of XML namespaces for identifying
conference information documents and document fragments. The
namespace URI for elements defined by this specification is a Uniform
Resource Namespace (URN) [2], using the namespace identifier 'ietf'
Rosenberg, et al. Standards Track [Page 7]
RFC 4575 Conference Package August 2006
defined by [6] and extended by RFC 3688 [21]. This URN is as
follows:
urn:ietf:params:xml:ns:conference-info
4.3. Versioning
The conference information is described by a hierarchical XML
structure with the root element <conference-info>. The root element
is the only element in the schema that carries a meaningful version
number for all the elements in the document. The whole conference
information is associated with this version number.
The 'version' attribute MUST be included in the root
<conference-info> element.
4.4. Partial Notifications Mechanism
This specification defines a basic partial notifications mechanism by
using a 'state' attribute as described below. This mechanism MUST be
supported by all subscribing clients. Additional general partial
notifications mechanisms can be defined and applied to this package
in the future.
All sub-elements in the <conference-info> hierarchical XML structure
can be classified in two groups: permissible for partial
notifications or not. Elements that carry a substantial amount of
data that is subject to frequent changes are permissible for partial
notifications and have a 'state' attribute attached to them. All
future extensions to this schema MUST define which extension elements
can also use this mechanism. All other elements can be updated as
atomic pieces of data only.
Below is the complete list of elements permissible to use the partial
notifications mechanism defined in this specification. (Note that
future partial notifications mechanisms can potentially be applicable
to additional elements.)
o Element <conference-info>
o Element <users>
o Element <user>
o Element <endpoint>
o Element <sidebars-by-val>
o Element <sidebars-by-ref>
Rosenberg, et al. Standards Track [Page 8]
RFC 4575 Conference Package August 2006
The 'state' attribute value indicates whether the reported
information about the element is "full" or "partial", or whether the
element has been "deleted" from the conference state document. The
default value of any 'state' attribute is "full".
A 'state' attribute of a child element in the document MUST be
consistent with its parent 'state'. This means that if the parent's
'state' is "full", the state of its children MUST be "full". If the
parent's 'state' is "partial", the state of its children MAY be
either "partial", "full", or "deleted". A parent element with
"deleted" 'state' SHOULD NOT contain child elements. Any information
provided for child elements of a "deleted" parent MUST be ignored by
the package subscriber.
4.5. Element Keys
The defined XML schema has a property of unique identification among
sub-elements of a common parent, which makes it possible to use the
partial notifications mechanism defined in this document. This
property is achieved by defining a key to each sub-element that can
appear multiple times under the common parent.
In the context of this specification, the element key is the set of
mandatory attributes or sub-elements of an element. The key value
MUST be unique for the element among its siblings of the same type.
In the context of this specification, two keys of type xs:anyURI are
considered to be equal if the UTF-8 representations of the keys
(including all URI parameters that can be included with the URI) are
identical. Consequently, using relative URIs and lexical white space
in these keys is NOT RECOMMENDED.
Below is the list of elements (subject to partial notifications of
their parent elements) with their keys as defined by this
specification:
o Element <user> uses as the key 'entity'
o Element <endpoint> uses as the key 'entity'
o Element <media> uses as the key 'id'
o Element <entry> (child to <sidebars-by-val>) uses as the key
'entity'
o Element <sidebars-by-ref> uses as the key <uri>
4.6. Constructing Coherent State Procedure
This section describes the algorithm for constructing a coherent
conference state by a subscriber to the conference package. Using
software programming abstraction, the subscriber maintains a single
Rosenberg, et al. Standards Track [Page 9]
RFC 4575 Conference Package August 2006
local version number for the whole conference document and a local
element instance for each element in the schema. Also, for each
element with keys (as defined above), the subscriber maintains a
virtual table with a row for each existing key value.
The first time a NOTIFY with a "full" document is received (as
indicated by the value of the 'state' attribute in the
<conference-info> element), the conference package subscriber MUST
set the local 'version' number to the value of the 'version'
attribute from the received <conference-info> and populate local data
with the received information.
Each time a new NOTIFY is received, the value of the local version
number and the value of the 'version' attribute in the new received
document are compared. If the value in the document is equal to or
less than the local version, the document is discarded without
processing.
Otherwise, if the received NOTIFY contains a "full" or "deleted"
state, the conference package subscriber MUST set the local 'version'
number to the value of the 'version' attribute from the received
<conference-info> and replace the local information with the received
document. Receiving "deleted" state for the <conference-info>
element means that the conference has ceased to exist and the
subscriber SHOULD terminate the subscription by sending the SUBSCRIBE
with Expires = 0.
Otherwise (i.e., if the received NOTIFY contains "partial" state), if
the 'version' number in the received document is more than one number
higher than the previous local version number, the subscriber MUST
generate a subscription refresh request to trigger a full state
notification. If the 'version' number in the document is one higher
than the local version number, the local version number is updated
accordingly and the document is used to update the local content as
described below.
For each sub-element of the <conference-info> element in the received
document,
1. If the element contains "full" state, the whole local element
content is flushed and repopulated from the document.
2. Otherwise, if the element contains "deleted" state, the whole
element MUST be removed from the local content.
3. Otherwise, if the element contains "partial" state:
Rosenberg, et al. Standards Track [Page 10]
RFC 4575 Conference Package August 2006
3.1. For elements with keys, the subscriber compares the keys
received in the update with the keys in the local tables.
3.1.1. If a key does not exist in the local table, a row is
added, and its content is set to the element
information from the update.
3.1.2. Otherwise, if a key of the same value does exist, for
each sub-element in the row, the algorithm is applied
from step 3.2.
3.2. For each atomic element received in the schema, the element
is replaced with the new information as a whole. For each
non-atomic element received in the schema with either no
'state' attribute included or the state attribute is set to
"full", the element is replaced with the new information as a
whole. Also, for each element with the state attribute set
to "deleted", the whole element is removed from the local
content.
3.3. For each non-atomic element with the state attribute set to
"partial", the algorithm is applied recursively starting from
step 3.1.
5. Conference Data
5.1. Overview
The <conference-info> document format is designed to convey
information about the conference and about participation in the
conference. The following non-normative diagram gives an example of
the overall hierarchy used in this format. Conferences contain users
who can be represented by multiple endpoints, each of which can have
multiple media streams. Conferences can also include or reference
"sidebar conferences". When sidebar information is incorporated into
a conference information document in a <sidebars-by-val> element,
each <entry> element represents a sidebar and can include any
sub-elements permitted in the <conference-info> top-level element.
Rosenberg, et al. Standards Track [Page 11]
RFC 4575 Conference Package August 2006
conference-info
|
|-- conference-description
|
|-- host-info
|
|-- conference-state
|
|-- users
| |-- user
| | |-- endpoint
| | | |-- media
| | | |-- media
| | | |-- call-info
| | |
| | |-- endpoint
| | |-- media
| |-- user
| |-- endpoint
| |-- media
|
|-- sidebars-by-ref
| |-- entry
| |-- entry
|
|-- sidebars-by-val
|-- entry
| |-- users
| |-- user
| |-- user
|-- entry
|-- users
|-- user
|-- user
|-- user
In most cases, this document does not mandate how the information,
presented through the conference document to the subscribers, is
obtained by the focus. In many cases, the information can be
dynamically learned from the call signaling and can also be manually
populated by an administrator - all subject to local policies. This
document specifies what the XML elements mean in order to allow the
subscribers to appropriately interpret it. Some portions of the
information are intended for processing by automata; others are for
human consumption only. For example, the <display-text> sub-elements
of elements <conf-uris>, <service-uris>, <available-media>,
Rosenberg, et al. Standards Track [Page 12]
RFC 4575 Conference Package August 2006
<host-info>, <endpoint>, and <media> are intended for display to
human subscribers only.
Although in multiple places this document states that specific
information "SHOULD" be communicated to the subscribers, note that
particular conference package subscribers (e.g., representing a
moderator, an administrator, or a cascaded focus) rely on accuracy of
this information for their proper operation. Therefore, a
conferencing server MUST ensure that all critical changes (stated
as "SHOULD") are communicated to these specific subscribers;
otherwise, these changes MUST be communicated to all subscribers to
the conference information.
Following sections describe the XML schema in more detail.
5.2. <conference-info>
A conference information document begins with the root element tag
<conference-info> of conference-type.
The following attributes are defined for <conference-info>:
entity: This attribute contains the conference URI that identifies
the conference being described in the document. This is the SIP
URI that an interested entity needs to SUBSCRIBE to in order to
get the conference package information. Note that this URI can be
listed as one of the URIs to be used in order to access the
conference by SIP means and in accordance with Section 5.3.1
below.
state: This attribute indicates whether the document contains the
whole conference information ("full") or only the information that
has changed since the previous document ("partial"), or whether
the conference ceased to exist ("deleted"). For more detail, see
Section 4.
version: This attribute allows the recipient of conference
information documents to properly order the received
notifications, and it MUST be used with the root <conference-info>
element. Version number is a 32-bit monotonically increasing
integer scoped within a subscription. A server MUST increment the
version number for each notification (full, partial, and deleted)
being sent to a subscriber and reporting a change in the
conference document state. For each partial notification, the
version number MUST be increased by one. Note that a partial
notification and a subsequent full notification over the same
dialog MAY contain the same version number if no change in the
conference state occurred in between.
Rosenberg, et al. Standards Track [Page 13]
RFC 4575 Conference Package August 2006
The <conference-info> element is comprised of <conference-
description>, <host-info>, <conference-state>, <users>,
<sidebars-by-ref> and <sidebars-by-val> child elements. A "full"
conference document MUST at least include the
<conference-description> and <users> child elements.
Following sections describe these elements in detail. The full XML
schema is provided in Section 6.
5.3. <conference-description>
The <conference-description> element describes the conference as a
whole.
The child elements <display-text>, <subject>, <free-text>, and
<keywords> are used to describe the conference content:
<display-text>: Contains descriptive text suitable for human
consumption, for example, listing in a directory
<subject>: Contains the subject of the conference
<free-text>: Contains an additional longer description of the
conference
<keywords>: Contains a list of space-separated string tokens that
can be used by search engines to better classify the conference
Additional child elements <conf-uris> and <service-uris> are used to
describe the conference-related URIs; <maximum-user-count> and
<available-media> are used to describe the overall characteristics.
This information is typically derived from the system conference
policies, is set before the conference activation, and is rarely
changed during the conference lifetime.
The following sections describe the remaining elements in more
detail. Other sub-elements can extend <conference-description> in
the future.
5.3.1. <conf-uris>
This element contains a sequence of <entry> child elements - each
containing the URI to be used in order to access the conference by
different signaling means. The value of the URI MUST be unique in
the conference context and is included in the <uri> sub-element.
Rosenberg, et al. Standards Track [Page 14]
RFC 4575 Conference Package August 2006
Each <entry> MAY contain additional information useful to the
participant when accessing the conference.
An <entry> element MAY contain the <display-text> sub-element that
provides a textual description meant for human consumption.
Each <entry> element SHOULD contain a <purpose> sub-element that
describes what happens when accessing the URI. The currently defined
<purpose> values to be used with the <conf-uris> are the following:
participation: Accessing a URI with this <purpose> will bring the
party into the conference.
streaming: Accessing a URI with this <purpose> will commence
streaming the conference, but not allow active participation.
Examples of suitable URI schemes include sip: and sips: [8], xmpp:
[22], h323: [20], and tel: [19] URIs. The rtsp [18] URI is suitable
for streaming.
Future extensions to this schema may define new values and register
them with IANA under the registry established by this specification.
5.3.2. <service-uris>
This element describes auxiliary services available for the
conference. Like <conference-uris>, this element contains a set of
<entry> child elements - each containing the URI to be used in order
to access different services available for the particular conference.
The value of the URI MUST be unique in the conference context and is
included in the <uri> sub-element.
An <entry> element MAY contain the <display-text> sub-element that
provides a textual description meant for user consumption.
Each <entry> element SHOULD contain a <purpose> sub-element. The
currently defined <purpose> values to be used with the <service-uris>
are the following:
web-page: Indicates the web page containing the additional
information about the conference.
recording: Indicates the link at which the recorded conference
context can be retrieved.
event: Indicates the URI at which a subscription to the conference
event package may be requested. This would typically be the
conference URI of the main conference.
Rosenberg, et al. Standards Track [Page 15]
RFC 4575 Conference Package August 2006
Future extensions to this schema may define new values and register
them with IANA under the registry established by this specification.
5.3.3. <maximum-user-count>
The value of this element provides a hint to the recipient of the
conference document about the number of users that can be invited to
the conference. Typically, this value represents the overall number
of users allowed to join the conference by different means as
published through the conference document in <conf-uris>. Note that
this value is set by an administrator and can reflect any local
policies combination such as network consumption, CPU processing
power, and licensing rules.
5.3.4. <available-media>
This element contains a sequence of <entry> child elements of
conference-medium-type, each being indexed by the attribute 'label'.
The 'label' attribute is the media stream identifier assigned by the
conferencing server: its value will be unique in the
<conference-info> context. The value of this attribute will
typically correspond to the Session Description Protocol (SDP)
"label" media attribute defined in [17].
Each <entry> describes a single media stream available to the
participants in the conference and contains the following
information:
<display-text>: This element contains the display text for the media
stream.
<type>: This element contains the media type of the media stream.
The value of this element MUST be one of the values registered for
"media" of SDP [3] and its later revision(s), for example,
"audio", "video", "text", and "message".
<status>: This element indicates the available status of the media
stream available to the conference participants. For example,
this would be the status of the media stream, which would be
offered by the focus, in a 'dial-out' scenario. Using normal SIP
offer/answer mechanisms (being defined in RFC 3264 [9]) in both
dial-in and dial-out scenarios, a participant can of course
establish only a subset of the available stream (i.e., request or
accept the stream in one direction only, if both directions are
available). The valid values are "sendrecv", "sendonly",
"recvonly", or "inactive" as defined in SDP [3] and its later
Rosenberg, et al. Standards Track [Page 16]
RFC 4575 Conference Package August 2006
revision(s). (Note that the value specifies the direction from
the participants' point of view.)
5.4. <host-info>
This element contains information about the entity hosting the
conference. This information is set before the conference
activation, and it is rarely changed during the conference lifetime,
unless the whole conference is moved to be hosted by another entity.
The host information is comprised of the following elements:
5.4.1. <display-text>
This element contains display text describing the entity hosting the
conference.
5.4.2. <web-page>
This element contains HTTP: or HTTPS: URI of a web page describing
either the conference service or the user hosting the conference.
5.4.3. <uris>
This element contains a set of <entry> child elements, each
containing the URI value and optionally its description.
5.5. <conference-state>
By including this element in the conference document, the server can
inform the subscribers about the changes in the overall conference
information. The <conference-state> child elements are described
below.
5.5.1. <user-count>
The value of this element tells the recipient of the conference
document the overall number of users participating in the conference
at a certain moment. Typically, this value represents the overall
number of users who joined the conference by different means as
published through the conference document in <conf-uris>. Note that
this number does not necessarily need to match and MAY exceed the
number of the entries in the <users> container. For example, in a
lecturing scenario, large conference notifications may not include
every participant in the <users> element, but instead report only the
panelists or the speakers.
Rosenberg, et al. Standards Track [Page 17]
RFC 4575 Conference Package August 2006
5.5.2. <active>
This Boolean element indicates whether the conference is currently
active. A conference is active if calling one of the <conf-uris> by
an authorized client results in successful establishment of a
signaling session between the client and the focus and a successful
joining of the conference.
5.5.3. <locked>
This Boolean element says whether the conference is currently locked.
In this context, "locked" means that the conference roster cannot be
added to (although participants may leave or be removed from the
conference).
5.6. <users> and Its <user> Sub-elements
The <users> element is a container of <user> child elements, each
describing a single participant in the conference.
The following attributes are defined for <user> element:
entity: This attribute contains the URI for the user in the
conference. This is a logical identifier, which corresponds to
the call signaling authenticated identity of the participant. The
'entity' value MUST be unique among all participants in the
conference. If, for some participants, the focus decides not to
reveal this information (e.g., due to local policies or security
reasons), the host portion of the user URI MUST use the .invalid
top level domain (TLD) according to definitions of RFC 2606 [5].
The focus also MUST construct the user portion of the URI so that
the URI is unique among all participants of the same domain. For
example, the convention
"AnonymousX" <sip:anonymousX@anonymous.invalid>
SHOULD be used for a participant requesting privacy in accordance
with the guidelines for generating anonymous URIs of RFC 3323 [11].
Note that in a different case, such as when used in conjunction with
Enhancements for Authenticated Identity Management in SIP [25], the
following convention can be used:
"AnonymousX" <sip:anonymousX@example.com>
state: This attribute indicates whether the document contains the
whole user information ("full") or only the information that has
changed since the previous document ("partial"), or whether the
user was removed from the conference ("deleted").
Rosenberg, et al. Standards Track [Page 18]
RFC 4575 Conference Package August 2006
The following child elements are defined for <user> element:
5.6.1. <display-text>
This element is used to display the user-friendly name in the
conference.
5.6.2. <associated-aors>
This element contains additional (to the 'entity') URIs being
associated with the <user>. Typically, this information will be
manually provided by an administrator showing the logical association
between signaling entities otherwise independent. For example, if
the 'entity' of a <user> contains a Globally Routable User URI (GRUU)
[24] or tel: URI RFC 3966 [19], it would be useful to populate this
field with the Address of Record (AOR) of the person who uses these
devices, each represented as an independent <user>.
5.6.3. <roles>
This element MAY contain a set of human-readable strings describing
the roles of the user in the conference. Note that this information
is applicable for human consumption only. This specification does
not define the set of possible conferencing roles or the semantics
associated with each. It is expected that future conferencing
specifications will define these and the corresponding schema
extensions, as appropriate.
5.6.4. <languages>
This element contains a list of tokens, separated by spaces, each
containing a language understood by the user. This information can
be automatically learned via call signaling or be manually set per
participant.
5.6.5. <cascaded-focus>
This element contains a conference URI (different from the main
conference URI) for users that are connected to the main conference
as a result of focus cascading. In accordance with the SIP
Conferencing Framework [16], this package allows for representation
of peer-to-peer (i.e., "flat") focus cascading only. The actual
cascading graph cannot be deduced from the information provided in
the package alone. Advanced applications can construct the graph by
subscribing to both this package and the Dialog Package [23] of each
cascaded focus and correlating the relevant information.
Rosenberg, et al. Standards Track [Page 19]
RFC 4575 Conference Package August 2006
5.6.6. <endpoint>
By including one or more <endpoint> elements under a parent <user>
element, the server can provide the desired level of detail
(including the state, media streams, and access information) about
the user's devices and signaling sessions taking part in the
conference.
In a conferencing system where authentication is performed per
endpoint (rather than per user), the focus can be unaware of the
logical association of multiple endpoints under a common user. In
this case, each endpoint will appear as a separate <user> with its
own <endpoint> sub-element(s) in the conference document.
In a different case, the focus may choose to shield the information
about the participant's multiple endpoints and signaling sessions
from other subscribers altogether (e.g., due to privacy policies).
To do so, the focus MAY aggregate the multiple signaling sessions'
information under a single <endpoint> element. Note that in this
case, the detailed call signaling information (represented by
<call-info> sub-element) will not be included.
5.7. <endpoint>
This section describes the <endpoint> element in more detail.
The following attributes are defined for the <endpoint> element:
entity: The server MUST generate the 'entity' key for each
<endpoint> element included under the parent <user>, such that its
value is unique in the user context. In SIP terms, this can be
the Contact URI, GRUU, etc.
state: This attribute indicates whether the element contains the
whole endpoint information ("full") or only the information that
has changed since the previous document ("partial"), or whether
the endpoint has been removed from the conference ("deleted").
The following child elements are defined for the <endpoint> element:
5.7.1. <display-text>
This element contains the display text for the endpoint.
Rosenberg, et al. Standards Track [Page 20]
RFC 4575 Conference Package August 2006
5.7.2. <referred>
This element contains information about the user whose action
resulted in this endpoint being brought into the conference (e.g.,
the SIP user identified by this URI sent a REFER to the focus). It
MAY contain the following sub-elements:
when: This element of the XML dateTime type contains the date and
time that the endpoint was referred to the conference and SHOULD
be expressed in Coordinated Universal Time (UTC) format. For
example,
<when>2005-03-04T20:00:00Z</when>
reason: This element contains the reason the endpoint was referred
to the conference. Including the information in the format
defined by RFC 3326 [12] is RECOMMENDED. For example,
<reason>Reason: SIP;text="Ad-hoc Invitation"</reason>
by: This element contains the URI of the entity that caused the
endpoint to be referred to the conference. In the case of SIP, it
will be populated from the Referred-By header defined in RFC 3892
[15].
5.7.3. <status>
This element contains the status of the endpoint and can assume the
following values:
connected: The endpoint is a participant in the conference.
Depending on the media policies, he/she can send and receive media
to and from other participants.
disconnected: The endpoint is not a participant in the conference,
and no active dialog exists between the endpoint and the focus.
on-hold: Active signaling dialog exists between an endpoint and a
focus, but endpoint is "on-hold" for this conference, i.e., he/she
is neither "hearing" the conference mix nor is his/her media being
mixed in the conference. As an example, the endpoint has asked to
join the conference using SIP, but his/her participation is
pending based on moderator approval. In the meantime, he/she is
hearing music-on-hold or some other kind of related content.
muted-via-focus: Active signaling dialog exists between an endpoint
and a focus and the endpoint can "listen" to the conference, but
the endpoint's media is not being mixed into the conference. Note
Rosenberg, et al. Standards Track [Page 21]
RFC 4575 Conference Package August 2006
that sometimes a subset of endpoint media streams can be muted by
focus (such as poor-quality video) while others (such as voice or
IM) can still be active. In this case, it is RECOMMENDED that the
"aggregated" endpoint connectivity <status> reflects the status of
the most active media.
pending: Endpoint is not yet in the session, but it is anticipated
that he/she will join in the near future.
alerting: A Public Switched Telephone Network (PSTN) ALERTING or SIP
180 Ringing was returned for the outbound call; endpoint is being
alerted.
dialing-in: Endpoint is dialing into the conference, not yet in the
roster (probably being authenticated).
dialing-out: Focus has dialed out to connect the endpoint to the
conference, but the endpoint is not yet in the roster (probably
being authenticated).
disconnecting: Focus is in the process of disconnecting the endpoint
(e.g., in SIP a DISCONNECT or BYE was sent to the endpoint).
Note that the defined transient statuses (e.g., disconnecting,
alerting, etc.) could generate a lot of traffic. Therefore,
implementations MAY choose to generate notifications on these
statuses to certain participants only or not generate them at all,
subject to local policy.
5.7.4. <joining-method>
This element contains the method by which the endpoint joined the
conference and can assume the following values:
dialed-in: The endpoint dialed into the conference (e.g., in a SIP
sent INVITE to the focus), which resulted in successful dialog
establishment.
dialed-out: The focus has brought the endpoint into the conference
(e.g., in SIP, the focus sent a successful INVITE to the
endpoint).
focus-owner: The endpoint is the focus for this conference. This
status is used only when a participant's UA acts as a conference
focus.
Rosenberg, et al. Standards Track [Page 22]
RFC 4575 Conference Package August 2006
5.7.5. <joining-info>
This element contains information about how the endpoint joined and
MAY contain the following sub-elements:
when: This element of the XML dateTime type contains the date and
time that the endpoint joined the conference and SHOULD be
expressed in Coordinated Universal Time (UTC).
reason: This element contains the reason the endpoint joined the
conference. Including the information in the format defined by
RFC 3326 [12] is RECOMMENDED. For example,
<reason>Reason: SIP;text="Ad-hoc Invitation"</reason>
by: This element contains the URI of the entity that caused the
endpoint to join the conference.
5.7.6. <disconnection-method>
This element contains the method by which the endpoint departed the
conference and can assume the following values:
departed: In SIP, the endpoint sent a BYE, thus leaving the
conference.
booted: In SIP, the endpoint was sent a BYE by the focus, ejecting
him/her out of the conference. Alternatively, the endpoint tried
to dial into the conference but was rejected by the focus due to
local policy.
failed: In SIP, the server tried to bring the endpoint into the
conference, but its attempt to contact the specific endpoint
resulted in a non-200 class final response. Alternatively, the
endpoint tried to dial into the conference without success due to
technical reasons.
busy: In SIP, the server tried to bring the endpoint into the
conference, but its attempt to contact the specific endpoint
resulted in a 486 "Busy Here" final response. Alternatively, the
endpoint tried to dial into the conference but the focus responded
with 486 response.
5.7.7. <disconnection-info>
This element contains information about the endpoint's departure from
the conference and MAY contain the following sub-elements:
Rosenberg, et al. Standards Track [Page 23]
RFC 4575 Conference Package August 2006
when: This element of the XML dateTime type contains the date and
time that the endpoint departed the conference and SHOULD be
expressed in Coordinated Universal Time (UTC).
reason: This element contains the reason the endpoint departed the
conference. When known and meaningful, including the information
as conveyed/reported by the call signaling in the format defined
by RFC 3326 [12] is RECOMMENDED. For example,
<reason>Reason: SIP;cause=415;text="Unsupported Media Type"</reason>
by: This element contains the URI of the entity that caused the
endpoint to depart the conference.
5.7.8. <media>
This element contains information about a single media stream and is
included for each media stream being established between the focus
and the <endpoint>. The media stream definition can be found in SDP
[3].
Note that if the <call-info> sub-element of the endpoint is not
included in the document by the server, it is possible that the media
streams listed under the common <endpoint> were established by
separate signaling sessions.
5.7.9. <call-info>
The <call-info> element provides detailed call signaling information
for a call being maintained between the participant and the focus.
Privacy policies MUST be consulted before revealing this information
to other participants.
The <sip> sub-element contains the SIP dialog identifier of the
endpoint's dialog with the focus. The element includes sub-elements
<display-text>, <call-id>, <to-tag>, <from-tag>.
In future, the <call-info> element can be expanded to include call
signaling protocol information for other protocols besides SIP.
5.8. <media>
This section describes the <media> element in more detail.
A single 'id' attribute is defined for this element. This is the
media stream identifier being generated by the server such that its
Rosenberg, et al. Standards Track [Page 24]
RFC 4575 Conference Package August 2006
value is unique in the endpoint context. This attribute is the key
to refer to a particular media stream in the conference document.
The following child elements are defined for <media>:
5.8.1. <display-text>
This element contains the display text for the media stream. The
value of this element corresponds to the SDP description media
attribute ("i") defined in SDP [3].
5.8.2. <type>
This element contains the media type for the media stream. The value
of this element MUST be one of the values registered for "media" of
SDP [3] and its later revision(s).
5.8.3. <label>
The <label> element carries a unique identifier for this stream among
all streams in the conference and is assigned by the focus. The
value of this element will typically correspond to the SDP "label"
media attribute defined in [17] and is exchanged between a
participant and a focus over the signaling connection between them.
If the <available-media> information (described in Section 5.3.4) is
included in the conference document, the value of this element MUST
be equal to the 'label' value of the corresponding media stream
<entry> in the <available-media> container.
5.8.4. <src-id>
The <src-id> element, if applicable, carries the information about
the actual source of the media. For example, for Real-time Transport
Protocol (RTP) / RTP Control Protocol (RTCP) [13] media streams, the
value MUST contain the synchronization source (SSRC) identifier value
generated by the endpoint for the stream it sends.
When an RTP mixer generates a contributing source (CSRC) identifiers'
list according to RTP/RTCP [13], it inserts a list of the SSRC
identifiers of the sources that contributed to the generation of a
particular packet into the RTP header of that packet. A quote from
RFC 3550 [13] explains as follows: "An example application is audio
conferencing where a mixer indicates all the talkers whose speech was
combined to produce the outgoing packet, allowing the receiver to
indicate the current talker, even though all the audio packets
contain the same SSRC identifier (that of the mixer)."
Rosenberg, et al. Standards Track [Page 25]
RFC 4575 Conference Package August 2006
If an RTP mixer compliant to the above is used, participants can
perform an SSRC to user mapping and identify "a current speaker".
5.8.5. <status>
The element <status> indicates the status in both directions of the
media stream and has the values "sendrecv", "sendonly", "recvonly",
or "inactive" as defined in SDP [3] and its later revision(s). Note
that value specifies the direction from the participant's point of
view. For example, a muted participant's stream will have the value
of "recvonly".
5.9. Sidebars
If a participant in the main conference joins a sidebar, a new <user>
element representing the user is created either as a part of a
separate sub-conference referenced from the <sidebars-by-ref> element
or under one of the <sidebars-by-val> elements as described below.
Note that the <user> in the main roster is not being deleted, but its
media statuses can be updated to reflect the effect being caused by
his/her participation in the sidebar. The display of this
information can vary among subscribers to the same conference
information, subject to local policies and to the subscriber role
both in the sidebar and in the main conference.
5.9.1. <sidebars-by-ref>
This element contains a set of <entry> child elements, each
containing a sidebar conference URI. The recipient of the
information can then subscribe to sidebar information independently
from the main conference package subscription.
5.9.2. <sidebars-by-val>
This element contains a set of <entry> child elements, each
containing information about a single sidebar. By using this element
of conference-type, the server can include a full or partial
description of each sidebar (as a sub-conference) in the body of the
main conference document.
6. XML Schema
<?xml version="1.0" encoding="UTF-8" ?>
<xs:schema
targetNamespace="urn:ietf:params:xml:ns:conference-info"
xmlns:tns="urn:ietf:params:xml:ns:conference-info"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
Rosenberg, et al. Standards Track [Page 26]
RFC 4575 Conference Package August 2006
xmlns="urn:ietf:params:xml:ns:conference-info"
elementFormDefault="qualified"
attributeFormDefault="unqualified">
<!--
This imports the xml:language definition
-->
<xs:import namespace="http://www.w3.org/XML/1998/namespace"
schemaLocation="http://www.w3.org/2001/03/xml.xsd"/>
<!--
CONFERENCE ELEMENT
-->
<xs:element name="conference-info" type="conference-type"/>
<!--
CONFERENCE TYPE
-->
<xs:complexType name="conference-type">
<xs:sequence>
<xs:element name="conference-description"
type="conference-description-type" minOccurs="0"/>
<xs:element name="host-info"
type="host-type" minOccurs="0"/>
<xs:element name="conference-state"
type="conference-state-type" minOccurs="0"/>
<xs:element name="users"
type="users-type" minOccurs="0"/>
<xs:element name="sidebars-by-ref"
type="uris-type" minOccurs="0"/>
<xs:element name="sidebars-by-val"
type="sidebars-by-val-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="entity"
type="xs:anyURI" use="required"/>
<xs:attribute name="state"
type="state-type" use="optional" default="full"/>
<xs:attribute name="version"
type="xs:unsignedInt" use="optional"/>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
STATE TYPE
-->
<xs:simpleType name="state-type">
<xs:restriction base="xs:string">
<xs:enumeration value="full"/>
<xs:enumeration value="partial"/>
<xs:enumeration value="deleted"/>
Rosenberg, et al. Standards Track [Page 27]
RFC 4575 Conference Package August 2006
</xs:restriction>
</xs:simpleType>
<!--
CONFERENCE DESCRIPTION TYPE
-->
<xs:complexType name="conference-description-type">
<xs:sequence>
<xs:element name="display-text"
type="xs:string" minOccurs="0"/>
<xs:element name="subject"
type="xs:string" minOccurs="0"/>
<xs:element name="free-text"
type="xs:string" minOccurs="0"/>
<xs:element name="keywords"
type="keywords-type" minOccurs="0"/>
<xs:element name="conf-uris"
type="uris-type" minOccurs="0"/>
<xs:element name="service-uris"
type="uris-type" minOccurs="0"/>
<xs:element name="maximum-user-count"
type="xs:unsignedInt" minOccurs="0"/>
<xs:element name="available-media"
type="conference-media-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
HOST TYPE
-->
<xs:complexType name="host-type">
<xs:sequence>
<xs:element name="display-text" type="xs:string"
minOccurs="0"/>
<xs:element name="web-page" type="xs:anyURI"
minOccurs="0"/>
<xs:element name="uris" type="uris-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
CONFERENCE STATE TYPE
-->
<xs:complexType name="conference-state-type">
Rosenberg, et al. Standards Track [Page 28]
RFC 4575 Conference Package August 2006
<xs:sequence>
<xs:element name="user-count" type="xs:unsignedInt"
minOccurs="0"/>
<xs:element name="active" type="xs:boolean"
minOccurs="0"/>
<xs:element name="locked" type="xs:boolean"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
CONFERENCE MEDIA TYPE
-->
<xs:complexType name="conference-media-type">
<xs:sequence>
<xs:element name="entry" type="conference-medium-type"
maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
CONFERENCE MEDIUM TYPE
-->
<xs:complexType name="conference-medium-type">
<xs:sequence>
<xs:element name="display-text" type="xs:string"
minOccurs="0"/>
<xs:element name="type" type="xs:string"/>
<xs:element name="status" type="media-status-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="label" type="xs:string"
use="required"/>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
URIs TYPE
-->
<xs:complexType name="uris-type">
<xs:sequence>
<xs:element name="entry" type="uri-type"
maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="state" type="state-type"
Rosenberg, et al. Standards Track [Page 29]
RFC 4575 Conference Package August 2006
use="optional" default="full"/>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
URI TYPE
-->
<xs:complexType name="uri-type">
<xs:sequence>
<xs:element name="uri" type="xs:anyURI"/>
<xs:element name="display-text" type="xs:string"
minOccurs="0"/>
<xs:element name="purpose" type="xs:string"
minOccurs="0"/>
<xs:element name="modified" type="execution-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
KEYWORDS TYPE
-->
<xs:simpleType name="keywords-type">
<xs:list itemType="xs:string"/>
</xs:simpleType>
<!--
USERS TYPE
-->
<xs:complexType name="users-type">
<xs:sequence>
<xs:element name="user" type="user-type"
minOccurs="0" maxOccurs="unbounded"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="state" type="state-type"
use="optional" default="full"/>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
USER TYPE
-->
<xs:complexType name="user-type">
<xs:sequence>
<xs:element name="display-text" type="xs:string"
minOccurs="0"/>
<xs:element name="associated-aors" type="uris-type"
Rosenberg, et al. Standards Track [Page 30]
RFC 4575 Conference Package August 2006
minOccurs="0"/>
<xs:element name="roles" type="user-roles-type"
minOccurs="0"/>
<xs:element name="languages" type="user-languages-type"
minOccurs="0"/>
<xs:element name="cascaded-focus" type="xs:anyURI"
minOccurs="0"/>
<xs:element name="endpoint" type="endpoint-type"
minOccurs="0" maxOccurs="unbounded"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="entity" type="xs:anyURI"/>
<xs:attribute name="state" type="state-type"
use="optional" default="full"/>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
USER ROLES TYPE
-->
<xs:complexType name="user-roles-type">
<xs:sequence>
<xs:element name="entry" type="xs:string"
maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
USER LANGUAGES TYPE
-->
<xs:simpleType name="user-languages-type">
<xs:list itemType="xs:language"/>
</xs:simpleType>
<!--
ENDPOINT TYPE
-->
<xs:complexType name="endpoint-type">
<xs:sequence>
<xs:element name="display-text" type="xs:string"
minOccurs="0"/>
<xs:element name="referred" type="execution-type"
minOccurs="0"/>
<xs:element name="status" type="endpoint-status-type"
minOccurs="0"/>
<xs:element name="joining-method" type="joining-type"
minOccurs="0"/>
<xs:element name="joining-info"
type="execution-type"
Rosenberg, et al. Standards Track [Page 31]
RFC 4575 Conference Package August 2006
minOccurs="0"/>
<xs:element name="disconnection-method"
type="disconnection-type"
minOccurs="0"/>
<xs:element name="disconnection-info"
type="execution-type"
minOccurs="0"/>
<xs:element name="media" type="media-type"
minOccurs="0" maxOccurs="unbounded"/>
<xs:element name="call-info" type="call-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="entity" type="xs:string"/>
<xs:attribute name="state" type="state-type"
use="optional" default="full"/>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
ENDPOINT STATUS TYPE
-->
<xs:simpleType name="endpoint-status-type">
<xs:restriction base="xs:string">
<xs:enumeration value="pending"/>
<xs:enumeration value="dialing-out"/>
<xs:enumeration value="dialing-in"/>
<xs:enumeration value="alerting"/>
<xs:enumeration value="on-hold"/>
<xs:enumeration value="connected"/>
<xs:enumeration value="muted-via-focus"/>
<xs:enumeration value="disconnecting"/>
<xs:enumeration value="disconnected"/>
</xs:restriction>
</xs:simpleType>
<!--
JOINING TYPE
-->
<xs:simpleType name="joining-type">
<xs:restriction base="xs:string">
<xs:enumeration value="dialed-in"/>
<xs:enumeration value="dialed-out"/>
<xs:enumeration value="focus-owner"/>
</xs:restriction>
</xs:simpleType>
<!--
DISCONNECTION TYPE
-->
Rosenberg, et al. Standards Track [Page 32]
RFC 4575 Conference Package August 2006
<xs:simpleType name="disconnection-type">
<xs:restriction base="xs:string">
<xs:enumeration value="departed"/>
<xs:enumeration value="booted"/>
<xs:enumeration value="failed"/>
<xs:enumeration value="busy"/>
</xs:restriction>
</xs:simpleType>
<!--
EXECUTION TYPE
-->
<xs:complexType name="execution-type">
<xs:sequence>
<xs:element name="when" type="xs:dateTime"
minOccurs="0"/>
<xs:element name="reason" type="xs:string"
minOccurs="0"/>
<xs:element name="by" type="xs:anyURI"
minOccurs="0"/>
</xs:sequence>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
CALL TYPE
-->
<xs:complexType name="call-type">
<xs:choice>
<xs:element name="sip" type="sip-dialog-id-type"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:choice>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
SIP DIALOG ID TYPE
-->
<xs:complexType name="sip-dialog-id-type">
<xs:sequence>
<xs:element name="display-text" type="xs:string"
minOccurs="0"/>
<xs:element name="call-id" type="xs:string"/>
<xs:element name="from-tag" type="xs:string"/>
<xs:element name="to-tag" type="xs:string"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
Rosenberg, et al. Standards Track [Page 33]
RFC 4575 Conference Package August 2006
<!--
MEDIA TYPE
-->
<xs:complexType name="media-type">
<xs:sequence>
<xs:element name="display-text" type="xs:string"
minOccurs="0"/>
<xs:element name="type" type="xs:string"
minOccurs="0"/>
<xs:element name="label" type="xs:string"
minOccurs="0"/>
<xs:element name="src-id" type="xs:string"
minOccurs="0"/>
<xs:element name="status" type="media-status-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="id" type="xs:string"
use="required"/>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
<!--
MEDIA STATUS TYPE
-->
<xs:simpleType name="media-status-type">
<xs:restriction base="xs:string">
<xs:enumeration value="recvonly"/>
<xs:enumeration value="sendonly"/>
<xs:enumeration value="sendrecv"/>
<xs:enumeration value="inactive"/>
</xs:restriction>
</xs:simpleType>
<!--
SIDEBARS BY VAL TYPE
-->
<xs:complexType name="sidebars-by-val-type">
<xs:sequence>
<xs:element name="entry" type="conference-type"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="state" type="state-type"
use="optional" default="full"/>
<xs:anyAttribute namespace="##other" processContents="lax"/>
</xs:complexType>
</xs:schema>
Rosenberg, et al. Standards Track [Page 34]
RFC 4575 Conference Package August 2006
7. Examples
7.1. Basic Example
The following is an example of a full conference information
document:
<?xml version="1.0" encoding="UTF-8"?>
<conference-info
xmlns="urn:ietf:params:xml:ns:conference-info"
entity="sips:conf233@example.com"
state="full" version="1">
<!--
CONFERENCE INFO
-->
<conference-description>
<subject>Agenda: This month's goals</subject>
<service-uris>
<entry>
<uri>http://sharepoint/salesgroup/</uri>
<purpose>web-page</purpose>
</entry>
</service-uris>
</conference-description>
<!--
CONFERENCE STATE
-->
<conference-state>
<user-count>33</user-count>
</conference-state>
<!--
USERS
-->
<users>
<user entity="sip:bob@example.com" state="full">
<display-text>Bob Hoskins</display-text>
<!--
ENDPOINTS
-->
<endpoint entity="sip:bob@pc33.example.com">
<display-text>Bob's Laptop</display-text>
<status>disconnected</status>
<disconnection-method>departed</disconnection-method>
<disconnection-info>
<when>2005-03-04T20:00:00Z</when>
<reason>bad voice quality</reason>
<by>sip:mike@example.com</by>
</disconnection-info>
Rosenberg, et al. Standards Track [Page 35]
RFC 4575 Conference Package August 2006
<!--
MEDIA
-->
<media id="1">
<display-text>main audio</display-text>
<type>audio</type>
<label>34567</label>
<src-id>432424</src-id>
<status>sendrecv</status>
</media>
</endpoint>
</user>
<!--
USER
-->
<user entity="sip:alice@example.com" state="full">
<display-text>Alice</display-text>
<!--
ENDPOINTS
-->
<endpoint entity="sip:4kfk4j392jsu@example.com;grid=433kj4j3u">
<status>connected</status>
<joining-method>dialed-out</joining-method>
<joining-info>
<when>2005-03-04T20:00:00Z</when>
<by>sip:mike@example.com</by>
</joining-info>
<!--
MEDIA
-->
<media id="1">
<display-text>main audio</display-text>
<type>audio</type>
<label>34567</label>
<src-id>534232</src-id>
<status>sendrecv</status>
</media>
</endpoint>
</user>
</users>
</conference-info>
7.2. Rich Example
The following is an example of a partial conference information
document. In this example, there are 32 participants in a voice
conference. The user Bob has been ejected from the conference by
Mike due to bad voice quality. Note that there are three sidebars in
Rosenberg, et al. Standards Track [Page 36]
RFC 4575 Conference Package August 2006
the conference; two are referenced just by their sidebar URIs, and
information about the third sidebar is included in this notification.
Also note that while this conference offers both audio and video
capabilities, only audio is currently in use.
<?xml version="1.0" encoding="UTF-8"?>
<conference-info
xmlns="urn:ietf:params:xml:ns:conference-info"
entity="sips:conf233@example.com"
state="partial" version="5">
<!--
CONFERENCE INFO
-->
<conference-description>
<display-text>Weekly Sales Meeting</display-text>
<subject>Agenda: This month's goals</subject>
<free-text>We will start strict on time</free-text>
<keywords>sales meeting weekly</keywords>
<conf-uris>
<entry>
<uri>tel:+18005671234</uri>
<display-text>TTI Bridge</display-text>
<purpose>participation</purpose>
</entry>
<entry>
<uri>h323:conf545@h323.example.com</uri>
<purpose>participation</purpose>
</entry>
<entry>
<uri>http://real.streaming.com/54634/live.ram</uri>
<purpose>streaming</purpose>
</entry>
</conf-uris>
<service-uris>
<entry>
<uri>http://sharepoint/salesgroup/</uri>
<purpose>web-page</purpose>
</entry>
<entry>
<uri>http://quicktime.com/54634/recording.mov</uri>
<display-text>Quicktime</display-text>
<purpose>recording</purpose>
</entry>
</service-uris>
<maximum-user-count>100</maximum-user-count>
<available-media>
<entry label="34567">
<display-text>main audio</display-text>
Rosenberg, et al. Standards Track [Page 37]
RFC 4575 Conference Package August 2006
<type>audio</type>
<status>sendrecv</status>
</entry>
<entry label="34569">
<display-text>main video</display-text>
<type>video</type>
<status>inactive</status>
</entry>
</available-media>
</conference-description>
<!--
HOST INFO
-->
<host-info>
<display-text>Sales Host</display-text>
<web-page>http://sharepoint/salesgroup/hosts/</web-page>
<uris>
<entry>
<uri>sip:sales@example.com</uri>
</entry>
</uris>
</host-info>
<!--
CONFERENCE STATE
-->
<conference-state>
<user-count>32</user-count>
<active>true</active>
<locked>false</locked>
</conference-state>
<!--
USERS
-->
<users>
<user entity="sip:bob@example.com">
<display-text>Bob Hoskins</display-text>
<associated-aors>
<entry>
<uri>mailto:bob@example.com</uri>
<display-text>email</display-text>
</entry>
</associated-aors>
<roles>
<entry>participant</entry>
</roles>
<languages>en</languages>
<!--
ENDPOINTS
Rosenberg, et al. Standards Track [Page 38]
RFC 4575 Conference Package August 2006
-->
<endpoint entity="sip:bob@pc33.example.com">
<display-text>Bob's Laptop</display-text>
<referred>
<when>2005-03-04T20:00:00Z</when>
<reason>expert required</reason>
<by>sip:mike@example.com</by>
</referred>
<status>disconnecting</status>
<joining-method>dialed-out</joining-method>
<joining-info>
<when>2005-03-04T20:00:00Z</when>
<reason>invitation</reason>
<by>sip:mike@example.com</by>
</joining-info>
<disconnection-method>booted</disconnection-method>
<disconnection-info>
<when>2005-03-04T20:00:00Z</when>
<reason>bad voice quality</reason>
<by>sip:mike@example.com</by>
</disconnection-info>
<!--
MEDIA
-->
<media id="1">
<display-text>main audio</display-text>
<type>audio</type>
<label>34567</label>
<src-id>432424</src-id>
<status>sendrecv</status>
</media>
<!--
CALL INFO
-->
<call-info>
<sip>
<display-text>full info</display-text>
<call-id>hsjh8980vhsb78</call-id>
<from-tag>vav738dvbs</from-tag>
<to-tag>8954jgjg8432</to-tag>
</sip>
</call-info>
</endpoint>
</user>
</users>
<!--
SIDEBARS BY REFERENCE
Rosenberg, et al. Standards Track [Page 39]
RFC 4575 Conference Package August 2006
-->
<sidebars-by-ref state="partial">
<entry>
<uri>sips:conf233@example.com;grid=45</uri>
<display-text>sidebar with Carol</display-text>
</entry>
<entry>
<uri>sips:conf233@example.com;grid=21</uri>
<display-text>private with Peter</display-text>
</entry>
</sidebars-by-ref>
<!--
SIDEBARS BY VALUE
-->
<sidebars-by-val state="partial">
<entry entity="sips:conf233@example.com;grid=77"
state="partial">
<users>
<user entity="sip:bob@example.com"/>
<user entity="sip:mark@example.com"/>
<user entity="sip:dan@example.com"/>
</users>
</entry>
</sidebars-by-val>
</conference-info>
8. Security Considerations
Subscriptions to conference state information can reveal very
sensitive information. For this reason, it is RECOMMENDED that a
focus use a strong means for authentication and conference
information protection and that it apply comprehensive authorization
rules when using the conference notification mechanism defined in
this document. The following sections will discuss each of these
aspects in more detail.
8.1. Connection Security
It is RECOMMENDED that a focus authenticate a conference package
subscriber using the normal SIP authentication mechanisms, such as
Digest as defined in Section 22 of RFC 3261 [8].
The mechanism used for conveying the conference information MUST
ensure integrity and SHOULD ensure confidentially of the information.
In order to achieve these, an end-to-end SIP encryption mechanism,
Rosenberg, et al. Standards Track [Page 40]
RFC 4575 Conference Package August 2006
such as S/MIME described in Section 26.2.4 of RFC 3261 [8], SHOULD be
used.
If a strong end-to-end security means (such as above) is not
available, it is RECOMMENDED that a focus use mutual hop-by-hop
Transport Layer Security (TLS) authentication and encryption
mechanisms described in Section 26.2.2 "SIPS URI Scheme" and Section
26.3.2.2 "Interdomain Requests" of RFC 3261 [8].
8.2. Authorization Considerations
Generally speaking, conference applications are very concerned about
authorization decisions. Mechanisms for establishing and enforcing
such authorization rules are a central concept throughout the SIP
Conferencing Framework [16]. Because most of the information about a
conference can be presented using the conference package, many of the
authorization rules directly apply to this specification. As a
result, a notification server MUST be capable of generating distinct
conference information views to different subscribers, subject to a
subscriber's role in a conference, personal access rights, etc. - all
subject to local authorization policies and rules.
Since a focus provides participant identity information using this
event package, participant privacy needs to be taken into account. A
focus MUST support requests by participants for privacy. Privacy can
be indicated by the conference policy - for every participant or
select participants. It can also be indicated in the session
signaling. In SIP, this can be done using the Privacy header field
described in RFC 3323 [11]. For a participant requesting privacy, no
identity information SHOULD be revealed by the focus in any included
URI (e.g., the Address of Record, Contact, or GRUU). For these
cases, the anonymous URI generation method outlined in Section 5.6 of
this document MUST be followed.
9. IANA Considerations
This document registers a SIP event package, a new MIME type,
application/conference-info+xml, a new XML namespace, and a new XML
schema, and creates a sub-registry "URI purposes" under the existing
registry: http://www.iana.org/assignments/sip-parameters.
9.1. conference Event Package Registration
This specification registers an event package, based on the
registration procedures defined in RFC 3265 [10]. The following is
the information required for such a registration:
Rosenberg, et al. Standards Track [Page 41]
RFC 4575 Conference Package August 2006
Package Name: conference
Package or Template-Package: This is a package.
Published Document: RFC 4575
Person to Contact: IETF SIPPING Working Group <sipping@ietf.org>, as
designated by the IESG <iesg@ietf.org>
9.2. application/conference-info+xml MIME Registration
MIME media type name: application
MIME subtype name: conference-info+xml
Mandatory parameters: none
Optional parameters: Same as charset parameter application/xml as
specified in RFC 3023 [7]
Encoding considerations: Same as encoding considerations of
application/xml as specified in RFC 3023 [7]
Security considerations: See Section 10 of RFC 3023 [7] and
Section 8 of this specification
Interoperability considerations: none
Published specification: This document
Applications which use this media type: This document type has been
used to support SIP conferencing applications
Additional Information:
Magic Number: None
File Extension: .xml
Macintosh file type code: "TEXT"
Personal and email address for further information: IETF SIPPING
Working Group <sipping@ietf.org>, as designated by the IESG
<iesg@ietf.org>
Intended usage: COMMON
Rosenberg, et al. Standards Track [Page 42]
RFC 4575 Conference Package August 2006
Author/Change controller: IETF SIPPING Working Group
<sipping@ietf.org>, as designated by the IESG <iesg@ietf.org>
9.3. URN Sub-Namespace Registration for
urn:ietf:params:xml:ns:conference-info
This section registers a new XML namespace, as per the guidelines in
RFC 3688 [21].
URI: The URI for this namespace is
urn:ietf:params:xml:ns:conference-info
Registrant Contact: IETF SIPPING Working Group <sipping@ietf.org>,
as designated by the IESG <iesg@ietf.org>
XML:
BEGIN
<?xml version="1.0"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML Basic 1.0//EN"
"http://www.w3.org/TR/xhtml-basic/xhtml-basic10.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="content-type"
content="text/html;charset=iso-8859-1"/>
<title>Conference Information Namespace</title>
</head
<body>
<h1>Namespace for Conference Information</h1>
<h2>urn:ietf:params:xml:ns:conference-info</h2>
<p>See <a href="http://www.rfc-editor.org/rfc/rfc4575.txt">
RFC4575</a>.</p>
</body>
</html>
END
9.4. XML Schema Registration
This specification registers a schema, as per the guidelines in RFC
3688 [21].
URI: please assign
Registrant Contact: IETF SIPPING Working Group <sipping@ietf.org>,
as designated by the IESG <iesg@ietf.org>
XML: The XML can be found as the sole content of Section 6.
Rosenberg, et al. Standards Track [Page 43]
RFC 4575 Conference Package August 2006
9.5. URI Purposes Sub-registry Establishment
The IANA has created a new sub-registry, "URI purposes", under the
already existing registry:
http://www.iana.org/assignments/sip-parameters.
The purpose of a URI is an XML element, encoded in the conference
event package RFC 4575. The value of the <purpose> element indicates
the intended usage of the URI in the context of the conference event
package and is defined in Sections 5.3.1 and 5.3.2 of this
specification.
This sub-registry is defined as a table that contains the following
three columns:
Value: The token under registration
Description: A descriptive text defining the intended usage of the
URI
Document: A reference to the document defining the registration
The IANA has created the table with the initial content as defined
below:
Value Description Document
------- ---------------------------------- ----------
participation The URI can be used to join the [RFC 4575]
conference
streaming The URI can be used to access the [RFC 4575]
streamed conference data
event The URI can be used to subscribe [RFC 4575]
to the conference event package
recording The URI can be used to access the [RFC 4575]
recorded conference data
web-page The URI can be used to access a [RFC 4575]
web page that contains additional
information of the conference
New values of the "URI purposes" are registered by the IANA and are
specification required according to the definition of RFC 2434 [4].
The IANA Considerations section of the specification MUST include the
following information:
Rosenberg, et al. Standards Track [Page 44]
RFC 4575 Conference Package August 2006
Value: The value of the <purpose> element to be registered
Description: A short description of the intended usage of the URI
10. Acknowledgements
The authors would like to thank Dan Petrie, Sean Olson, Alan
Johnston, Rohan Mahy, Cullen Jennings, Brian Rosen, Roni Even, and
Miguel Garcia for their comments and inputs.
11. References
11.1. Normative References
[1] Bradner, S., "Key words for use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997.
[2] Moats, R., "URN Syntax", RFC 2141, May 1997.
[3] Handley, M., Jacobson, V. and C. Perkins, "SDP: Session
Description Protocol", RFC 4566, July 2006.
[4] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA
Considerations Section in RFCs", BCP 26, RFC 2434, October
1998.
[5] Eastlake 3rd, D. and A. Panitz, "Reserved Top Level DNS Names",
BCP 32, RFC 2606, June 1999.
[6] Moats, R., "A URN Namespace for IETF Documents", RFC 2648,
August 1999.
[7] Murata, M., St. Laurent, S., and D. Kohn, "XML Media Types",
RFC 3023, January 2001.
[8] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A.,
Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP:
Session Initiation Protocol", RFC 3261, June 2002.
[9] Rosenberg, J. and H. Schulzrinne, "An Offer/Answer Model with
Session Description Protocol (SDP)", RFC 3264, June 2002.
[10] Roach, A.B., "Session Initiation Protocol (SIP)-Specific Event
Notification", RFC 3265, June 2002.
[11] Peterson, J., "A Privacy Mechanism for the Session Initiation
Protocol (SIP)", RFC 3323, November 2002.
Rosenberg, et al. Standards Track [Page 45]
RFC 4575 Conference Package August 2006
[12] Schulzrinne, H., Oran, D., and G. Camarillo, "The Reason Header
Field for the Session Initiation Protocol (SIP)", RFC 3326,
December 2002.
[13] Schulzrinne, H., Casner, S., Frederick, R., and V. Jacobson,
"RTP: A Transport Protocol for Real-Time Applications", STD 64,
RFC 3550, July 2003.
[14] Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD
63, RFC 3629, November 2003.
[15] Sparks, R., "The Session Initiation Protocol (SIP) Referred-By
Mechanism", RFC 3892, September 2004.
[16] Rosenberg, J., "A Framework for Conferencing with the Session
Initiation Protocol (SIP)", RFC 4353, February 2006.
[17] Levin, O. and G. Camarillo, "The Session Description Protocol
(SDP) Label Attribute", RFC 4574, August 2006.
11.2. Informative References
[18] Schulzrinne, H., Rao, A., and R. Lanphier, "Real Time Streaming
Protocol (RTSP)", RFC 2326, April 1998.
[19] Schulzrinne, H., "The tel URI for Telephone Numbers", RFC 3966,
December 2004.
[20] Levin, O., "H.323 Uniform Resource Locator (URL) Scheme
Registration", RFC 3508, April 2003.
[21] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
January 2004.
[22] Saint-Andre, P., "A Uniform Resource Identifier (URI) Scheme
for the Extensible Messaging and Presence Protocol (XMPP)",
Work in Progress, December 2004.
[23] Rosenberg, J., Schulzrinne, H., and R. Mahy, "An INVITE-
Initiated Dialog Event Package for the Session Initiation
Protocol (SIP)", RFC 4235, November 2005.
[24] Rosenberg, J., "Obtaining and Using Globally Routable User
Agent (UA) URIs (GRUU) in the Session Initiation Protocol
(SIP)", Work in Progress, May 2006.
Rosenberg, et al. Standards Track [Page 46]
RFC 4575 Conference Package August 2006
[25] Peterson, J. and C. Jennings, "Enhancements for Authenticated
Identity Management in the Session Initiation Protocol (SIP)",
RFC 4474, August 2006.
Authors' Addresses
Jonathan Rosenberg
Cisco Systems
600 Lanidex Plaza
Parsippany, NJ 07054
US
Phone: +1 973 952-5000
EMail: jdrosen@cisco.com
URI: http://www.jdrosen.net
Henning Schulzrinne
Columbia University
M/S 0401
1214 Amsterdam Ave.
New York, NY 10027
US
EMail: schulzrinne@cs.columbia.edu
URI: http://www.cs.columbia.edu/~hgs
Orit Levin (editor)
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052
US
EMail: oritl@microsoft.com
Rosenberg, et al. Standards Track [Page 47]
RFC 4575 Conference Package August 2006
Full Copyright Statement
Copyright (C) The Internet Society (2006).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).
Rosenberg, et al. Standards Track [Page 48]
ERRATA
