rfc6857
Internet Engineering Task Force (IETF) K. Fujiwara
Request for Comments: 6857 JPRS
Category: Standards Track March 2013
ISSN: 2070-1721
Post-Delivery Message Downgrading for Internationalized Email Messages
Abstract
The Email Address Internationalization (SMTPUTF8) extension to SMTP
allows Unicode characters encoded in UTF-8 and outside the ASCII
repertoire in mail header fields. Upgraded POP and IMAP servers
support internationalized messages. If a POP or IMAP client does not
support Email Address Internationalization, a POP or IMAP server
cannot deliver internationalized messages to the client and cannot
remove the message. To avoid that situation, this document describes
a mechanism for converting internationalized messages into the
traditional message format. As part of the conversion process,
message elements that require internationalized treatment are recoded
or removed, and receivers are able to recognize that they received
messages containing such elements, even if they cannot process the
internationalized elements.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc6857.
Fujiwara Standards Track [Page 1]
RFC 6857 POP or IMAP Downgrade March 2013
Copyright Notice
Copyright (c) 2013 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Fujiwara Standards Track [Page 2]
RFC 6857 POP or IMAP Downgrade March 2013
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1. Problem Statement . . . . . . . . . . . . . . . . . . . . 4
1.2. Possible Solutions . . . . . . . . . . . . . . . . . . . . 4
1.3. Approach Taken in This Specification . . . . . . . . . . . 5
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. Email Message Header Field Downgrading . . . . . . . . . . . . 7
3.1. Downgrading Method for Each ABNF Element . . . . . . . . . 7
3.1.1. Unstructured Downgrading . . . . . . . . . . . . . . . 7
3.1.2. Word Downgrading . . . . . . . . . . . . . . . . . . . 7
3.1.3. Comment Downgrading . . . . . . . . . . . . . . . . . 7
3.1.4. MIME-Value Downgrading . . . . . . . . . . . . . . . . 7
3.1.5. Display-Name Downgrading . . . . . . . . . . . . . . . 7
3.1.6. Domain Downgrading . . . . . . . . . . . . . . . . . . 8
3.1.7. Group Downgrading . . . . . . . . . . . . . . . . . . 8
3.1.8. Mailbox Downgrading . . . . . . . . . . . . . . . . . 8
3.1.9. Type-Addr Downgrading . . . . . . . . . . . . . . . . 9
3.1.10. Encapsulation: A Last Resort . . . . . . . . . . . . . 9
3.2. Downgrading Method for Each Header Field . . . . . . . . . 10
3.2.1. Address Header Fields That Contain <address>
Elements . . . . . . . . . . . . . . . . . . . . . . . 10
3.2.2. Non-ASCII Strings in <comment> Elements . . . . . . . 11
3.2.3. Message-ID Header Fields . . . . . . . . . . . . . . . 11
3.2.4. Received Header Field . . . . . . . . . . . . . . . . 11
3.2.5. MIME Content Header Fields . . . . . . . . . . . . . . 12
3.2.6. Non-ASCII Characters in <unstructured> Elements . . . 12
3.2.7. Non-ASCII Characters in <phrase> Elements . . . . . . 12
3.2.8. Other Header Fields . . . . . . . . . . . . . . . . . 12
4. MIME Body Parts and Delivery Status Notifications . . . . . . 12
4.1. MIME Body Part Header Field Downgrading . . . . . . . . . 13
4.2. Delivery Status Notification Downgrading . . . . . . . . . 13
5. Security Considerations . . . . . . . . . . . . . . . . . . . 13
6. Implementation Note: Encoded-Word Encoding . . . . . . . . . . 14
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 15
7.1. Obsolescence of Existing Downgraded-* Header Fields . . . 15
7.2. Registration of New Downgraded-* Header Fields . . . . . . 15
8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 16
9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 16
9.1. Normative References . . . . . . . . . . . . . . . . . . . 16
9.2. Informative References . . . . . . . . . . . . . . . . . . 18
Appendix A. Downgrading Example . . . . . . . . . . . . . . . . . 19
Fujiwara Standards Track [Page 3]
RFC 6857 POP or IMAP Downgrade March 2013
1. Introduction
1.1. Problem Statement
Traditional (legacy) mail systems, which are defined by the Internet
Message Format [RFC5322] and other specifications, allow only ASCII
characters in mail header field values. The SMTPUTF8 extension
[RFC6530] [RFC6531] [RFC6532] allows Unicode characters encoded in
UTF-8 [RFC3629] in these mail header fields. "Raw non-ASCII strings"
refers to strings of those characters in which at least one of them
is not part of the ASCII repertoire.
If a header field contains non-ASCII strings, a POP or IMAP server
cannot deliver internationalized messages to legacy clients that do
not send UTF8 commands or have UTF8 capability. Also, because they
have no obvious or standardized way to explain what is going on to
clients, a POP or IMAP server cannot even safely discard the message.
1.2. Possible Solutions
There are four plausible approaches to the problem. The preferred
approach depends on the particular circumstances and relationship
among the delivery SMTP server, the mail store, the POP or IMAP
server, and the users and their Mail User Agent (MUA) clients. The
four approaches are as follows:
1. If the delivery Mail Transport Agent (MTA) has sufficient
knowledge about the POP or IMAP server and the clients being
used, the message may be rejected as undeliverable.
2. A new, surrogate, message may be created by downgrading the
original one in the POP or IMAP server in a way that preserves
maximum information at the expense of some complexity and that
does not create security or operational problems in the mail
system. These surrogate messages are referred to as "downgraded"
in this specification and as "surrogate messages" elsewhere.
3. Some intermediate downgrading may be applied that balances
additional information loss against lower complexity and greater
ease of implementation.
4. The POP or IMAP server may fabricate a message that is intended
to notify the client that an internationalized message is waiting
but cannot be delivered until an upgraded client is available.
Fujiwara Standards Track [Page 4]
RFC 6857 POP or IMAP Downgrade March 2013
1.3. Approach Taken in This Specification
This specification describes the second of these options. It is
worth noting that, at least in the general case, none of these
options preserves sufficient information to guarantee that it is
possible to reply to an incoming message without loss of information,
so the choice may be considered one of the available "least bad"
options. While this document specifies a well-designed mechanism, it
is only an interim solution while clients are being upgraded
[RFC6855] [RFC6856].
This message downgrading mechanism converts mail header fields to an
all-ASCII representation. The POP or IMAP server can use the
downgrading mechanism and then deliver the internationalized message
in a traditional form, which allows receivers to know whether a
message is internationalized or unknown or broken.
The Internationalized Mail Header specification [RFC6532] allows
UTF-8 characters (see Section 2) to be used in mail header fields and
MIME header fields. The Internationalized Mail Transport
specification [RFC6531] allows UTF-8 characters to be used in some
trace header fields. The message downgrading mechanism specified
here describes the method by which internationalized messages
[RFC6530] [RFC6532] are converted to traditional email messages
[RFC5322].
This document provides a precise definition of the minimum-
information-loss message downgrading process.
Downgrading consists of the following two parts:
o Email header field downgrading
o MIME header field downgrading
Email header field downgrading is described in Section 3. It
generates ASCII-only header fields.
Header fields starting with Downgraded- are introduced in
Section 3.1.10. They preserve the information that appeared in the
original header fields.
The definition of MIME header fields in internationalized messages is
described in RFC 6532. A delivery status notification may contain
non-ASCII addresses. MIME header field downgrading is described in
Section 4.1. Delivery status notification downgrading is described
in Section 4.2. It generates ASCII-only MIME header fields.
Fujiwara Standards Track [Page 5]
RFC 6857 POP or IMAP Downgrade March 2013
Displaying downgraded messages that originally contained
internationalized header fields is out of scope of this document. A
POP or IMAP client that does not support UTF8 extensions as defined
for POP3 "UTF8 command" and IMAP "ENABLE UTF8=ACCEPT command" does
not recognize the internationalized message format [RFC6532].
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
Many of the specialized terms used in this specification are defined
in other documents. They include "Overview and Framework for
Internationalized Email" [RFC6530], the Internet Message Format
specification [RFC5322], and some of the basic MIME documents
[RFC2045] [RFC2183]. This specification makes extensive use of the
MIME Message Header Extensions [RFC2047] and extended MIME parameter
encodings [RFC2231]. For convenience, both are described as
"encoded-words" or "encoded-word encoding". All of the encoded-words
generated according to this specification use UTF-8 as their charset.
The terms "U-label", "A-label", and "IDNA" are used as defined in the
IDNA Definitions document [RFC5890]. The terms "ASCII address",
"non-ASCII address", "SMTPUTF8", "message", and "internationalized
message" are used as defined RFC 6530. The term "non-ASCII string"
is used with the definition provided in the Internationalized Email
Headers document [RFC6532]. The term "UTF-8 character" is used
informally in this document to denote a Unicode character, encoded in
UTF-8, outside the ASCII repertoire. Such characters are more
formally described using the ABNF element <UTF8-non-ascii>, defined
in RFC 6532.
This document refers to the Augmented Backus-Naur Form (ABNF)
[RFC5234] elements that appear in RFC 5322 and RFC 2045. RFC 5322
describes the ABNF elements <CFWS>, <comment>, <display-name>,
<group>, <id-left>, <id-right>, <mailbox>, <quoted-string>,
<unstructured>, and <word>. RFC 2045 describes the ABNF element
<value>. Section 3.3 of the Internationalized Mail Transport
specification [RFC6531] and Section 3.2 of the Internationalized
Email Headers document [RFC6532] updated <domain> to allow non-ASCII
characters.
Some additional terms are defined locally in-line below.
Fujiwara Standards Track [Page 6]
RFC 6857 POP or IMAP Downgrade March 2013
3. Email Message Header Field Downgrading
This section defines the method for converting each header field that
may contain non-ASCII strings into ASCII. Section 3.1 describes the
methods for rewriting each ABNF element. Section 3.2 describes the
methods for rewriting each header field.
3.1. Downgrading Method for Each ABNF Element
Header field downgrading is defined below for each ABNF element.
Conversion of the header field terminates when no characters other
than those in the ASCII repertoire remain in the header field.
3.1.1. Unstructured Downgrading
If the header field has an <unstructured> field that contains
non-ASCII strings, apply encoded-word encoding.
3.1.2. Word Downgrading
If the header field has any <word> fields that contain non-ASCII
strings, apply encoded-word encoding.
3.1.3. Comment Downgrading
If the header field has any <comment> fields that contain non-ASCII
strings, apply encoded-word encoding.
3.1.4. MIME-Value Downgrading
If the header field has any <value> elements [RFC2045] that contain
non-ASCII strings, remove any <CFWS> that appear outside DQUOTE
[RFC5234] that appear in those elements, then encode the <value>
elements as extended MIME parameter encodings [RFC2231] and leave the
language information empty.
3.1.5. Display-Name Downgrading
If the header field has any <address> (<mailbox> or <group>)
elements, and they have <display-name> elements that contain
non-ASCII strings, encode the <display-name> elements as encoded-
words. Display-Name downgrading uses the same algorithm as Word
downgrading.
Fujiwara Standards Track [Page 7]
RFC 6857 POP or IMAP Downgrade March 2013
3.1.6. Domain Downgrading
If the header field has any <domain> elements that contain U-labels,
rewrite the non-ASCII domain name into an ASCII domain name using
A-labels [RFC5891].
3.1.7. Group Downgrading
<group> is defined in Section 3.4 of the Internet Message Format
specification [RFC5322]. The <group> element may contain <mailbox>
elements that contain non-ASCII addresses.
If a <group> element contains <mailbox> elements and one of those
<mailbox> elements contains a non-ASCII <local-part>, rewrite the
<group> element as
display-name " " ENCODED_WORD " :;"
where the <ENCODED_WORD> is the original <group-list> encoded as
encoded-words.
Otherwise, the <group> element contains an ASCII-only <local-part>.
If the <group> element contains non-ASCII <mailbox> elements, they
contain non-ASCII domain names. Rewrite the non-ASCII domain names
into ASCII domain names using A-labels [RFC5891]. Generated
<mailbox> elements contain ASCII addresses only.
3.1.8. Mailbox Downgrading
If the <local-part> of the <mailbox> element contains no characters
other than those in the ASCII repertoire, the <domain> element may
contain non-ASCII characters. Rewrite the non-ASCII domain names
into ASCII domain names using A-labels [RFC5891].
Otherwise, the <local-part> may contain non-ASCII characters. The
<local-part> that contains characters outside the ASCII repertoire
has no equivalent format for ASCII addresses. The <addr-spec>
element that contains non-ASCII strings may appear in two forms as:
"<" addr-spec ">"
or
addr-spec
Rewrite both as:
ENCODED-WORD " :;"
Fujiwara Standards Track [Page 8]
RFC 6857 POP or IMAP Downgrade March 2013
where the <ENCODED-WORD> is the original <addr-spec> encoded as
encoded-words.
3.1.9. Type-Addr Downgrading
If the header field contains <utf-8-type-addr> and the
<utf-8-type-addr> contains raw non-ASCII strings (<UTF8-non-ascii>),
it is in utf-8-address form [RFC6533]. Convert it to
utf-8-addr-xtext form [RFC6533]. Comment downgrading is also
performed in this case. If the address type is unrecognized and the
header field contains non-ASCII strings, then fall back to using
Encapsulation on the entire header field as specified in
Section 3.1.10.
3.1.10. Encapsulation: A Last Resort
As a last resort, when header fields cannot be converted as discussed
in the previous subsection, the fields are deleted and replaced by
specialized new header fields. Those fields are defined to preserve,
in encoded form, as much information as possible from the header
field values of the incoming message. This mechanism is known as
Encapsulation downgrading in this specification because it preserves
the original information in a different form. The syntax of these
new header fields is:
fields =/ downgraded
downgraded = "Downgraded-Message-Id:" unstructured CRLF /
"Downgraded-Resent-Message-Id:" unstructured CRLF /
"Downgraded-In-Reply-To:" unstructured CRLF /
"Downgraded-References:" unstructured CRLF /
"Downgraded-Original-Recipient:" unstructured CRLF /
"Downgraded-Final-Recipient:" unstructured CRLF
Applying this procedure to the "Received:" header field is
prohibited. Encapsulation downgrading is allowed for "Message-ID:",
"In-Reply-To:", "References:", "Original-Recipient:", and
"Final-Recipient:" header fields.
To preserve a header field in a Downgraded- header field:
1. Generate a new header field.
* The field name is a concatenation of Downgraded- and the
original field name.
* The initial new field value is the original header field
value.
Fujiwara Standards Track [Page 9]
RFC 6857 POP or IMAP Downgrade March 2013
2. Treat the initial new header field value as if it were
unstructured, and then apply the encoded-word encoding as
necessary so that the resulting new header field value is
completely in ASCII.
3. Remove the original header field.
3.2. Downgrading Method for Each Header Field
The Mail and MIME Header Fields document [RFC4021] establishes a
registry of header fields. This section describes the downgrading
method for each header field listed in that registry as of the date
of publication of this specification.
If the entire mail header field contains no characters other than
those in the ASCII repertoire, email header field downgrading is not
required. Each header field's downgrading method is described below.
3.2.1. Address Header Fields That Contain <address> Elements
From:
Sender:
To:
Cc:
Bcc:
Reply-To:
Resent-From:
Resent-Sender:
Resent-To:
Resent-Cc:
Resent-Bcc:
Resent-Reply-To:
Return-Path:
Disposition-Notification-To:
If the header field contains non-ASCII characters, first perform
Comment downgrading and Display-Name downgrading as described in the
corresponding subsections of Section 3.1. If the header field still
contains non-ASCII characters, complete the following two steps:
1. If the header field contains <group> elements that contain
non-ASCII addresses, perform Group downgrading on those elements.
2. If the header field contains <mailbox> elements that contain
non-ASCII addresses, perform Mailbox downgrading on those
elements.
Fujiwara Standards Track [Page 10]
RFC 6857 POP or IMAP Downgrade March 2013
This procedure may generate empty <group> elements in the "From:" and
"Sender:" header fields. The Group Syntax document [RFC6854] updates
the Internet Message Format specification [RFC5322] to allow (empty)
<group> elements in the "From:" and "Sender:" header fields.
3.2.2. Non-ASCII Strings in <comment> Elements
Date:
Resent-Date:
MIME-Version:
Content-ID:
Content-Transfer-Encoding:
Content-Language:
Accept-Language:
Auto-Submitted:
Except in comments, these header fields do not contain characters
other than those in the ASCII repertoire. If the header field
contains UTF-8 characters in comments, perform Comment downgrading.
3.2.3. Message-ID Header Fields
Message-ID:
Resent-Message-ID:
In-Reply-To:
References:
If there are non-ASCII strings in <id-left> or <id-right> elements,
perform Encapsulation. Otherwise, the header field contains UTF-8
characters in comments and Comment downgrading should be performed.
3.2.4. Received Header Field
Received:
If <domain> elements or <mailbox> elements contain U-labels, perform
Domain downgrading as specified in Section 3.1.6. Comments may
contain non-ASCII strings; if so, perform Comment downgrading.
After the Domain downgrading and the Comment downgrading, if the
"FOR" clause contains a non-ASCII <local-part>, remove the FOR
clause. If the "ID" clause contains a non-ASCII value, remove the ID
clause.
Fujiwara Standards Track [Page 11]
RFC 6857 POP or IMAP Downgrade March 2013
3.2.5. MIME Content Header Fields
Content-Type:
Content-Disposition:
If there are non-ASCII strings in <value> or <CFWS> elements, perform
MIME-Value and Comment downgrading.
3.2.6. Non-ASCII Characters in <unstructured> Elements
Subject:
Comments:
Content-Description:
If non-ASCII strings are present in <unstructured> elements, perform
Unstructured downgrading.
3.2.7. Non-ASCII Characters in <phrase> Elements
Keywords:
If non-ASCII strings are present in <phrase> elements, perform Word
downgrading.
3.2.8. Other Header Fields
Other header fields that are not covered in this document (such as
implementation-specific or user-defined fields) might also contain
non-ASCII strings. Any header field that does not have a conversion
method defined above will be in this category and treated as follows.
If there are non-ASCII strings present in the header fields, perform
Unstructured downgrading.
If the software understands the header field's structure and a
downgrading algorithm other than Unstructured is applicable, that
software SHOULD use that algorithm; Unstructured downgrading is used
when there is no other option.
Mailing list header fields (those that start in "List-") are part of
this category.
4. MIME Body Parts and Delivery Status Notifications
Both the MIME body part header fields [RFC2045] [RFC6532] and the
contents of a delivery status notification [RFC6533] may contain
non-ASCII characters.
Fujiwara Standards Track [Page 12]
RFC 6857 POP or IMAP Downgrade March 2013
4.1. MIME Body Part Header Field Downgrading
RFC 6532 specifies an extension that permits MIME header fields,
including body part header fields, to contain non-ASCII strings.
This section defines the conversion method to ASCII-only header
fields for each MIME header field that contains non-ASCII strings.
Parse the message body's MIME structure at all levels and check each
MIME header field to see whether it contains non-ASCII strings. If
the header field contains non-ASCII strings in the header field
value, the header field is a target of the MIME body part header
field's downgrading. The downgrading methods used for the MIME body
part header fields Content-ID, Content-Type, Content-Disposition, and
Content-Description are the same as those used for the header fields
of the same name described in Section 3.2
4.2. Delivery Status Notification Downgrading
If the message contains a delivery status notification (see Section 6
of the SMTP DSN Extension [RFC3461]), perform the following tests and
conversions.
If there are "Original-Recipient:" and "Final-Recipient:" header
fields, and the header fields contain non-ASCII strings, perform
Type-Addr downgrading.
5. Security Considerations
The purpose of post-delivery message downgrading is to allow POP and
IMAP servers to deliver internationalized messages to traditional POP
and IMAP clients and to permit the clients to display those messages.
Users that receive such messages can know that they were
internationalized. It does not permit receivers to read the messages
in their original form and, in general, will not permit generating
replies, at least without significant user intervention.
After downgrading as specified in this document, the header fields of
a message will contain ASCII characters only, some of them in
encoded-word form. Nothing in this document or other SMTPUTF8
specifications [RFC6530] [RFC6531] alters the basic properties of
MIME that allow characters outside the ASCII repertoire in encodings
as specified for them. Thus, this document inherits the security
considerations associated with MIME-encoded header fields as
specified in RFC 2047 [RFC2047] and with UTF-8 itself as specified in
RFC 3629 [RFC3629].
Rewriting header fields increases the opportunities for undetected
spoofing by malicious senders. However, the rewritten header field
values are preserved in equivalent MIME form or in newly defined
Fujiwara Standards Track [Page 13]
RFC 6857 POP or IMAP Downgrade March 2013
header fields for which traditional MUAs have no special processing
procedures.
The techniques described here may invalidate methods that depend on
digital signatures over any part of the message, which includes the
top-level header fields and body part header fields. Depending on
the specific message being downgraded, at least the following
techniques are likely to break: DomainKeys Identified Mail (DKIM) and
possibly S/MIME and Pretty Good Privacy (PGP). The downgrade
mechanism SHOULD NOT remove signatures even if the signatures will
fail validation after downgrading. As much of the information as
possible from the original message SHOULD be preserved. In addition,
MUAs may be able to use the presence of an Authentication-Results
header field [RFC5451] to assess whether the digital signatures were
valid before the header fields were downgraded.
While information in any email header field should usually be treated
with some suspicion, current email systems commonly employ various
mechanisms and protocols to make the information more trustworthy.
Information in the new Downgraded-* header fields is not inspected by
traditional MUAs and may be even less trustworthy than the
traditional header fields. Note that the Downgraded-* header fields
could have been inserted with malicious intent (and with content
unrelated to the traditional header fields); however, traditional
MUAs do not evaluate Downgraded-* header fields.
See the Security Considerations sections in the Group Syntax document
[RFC6854] and the Internationalized Email Framework [RFC6530] for
more discussion.
6. Implementation Note: Encoded-Word Encoding
While the specification of encoded-words includes specific rules for
dealing with whitespace in adjacent encoded words [RFC2047], there
are a number of deployed implementations that fail to implement the
algorithm correctly. As a result, whitespace behavior is somewhat
unpredictable, in practice, when multiple encoded words are used.
While RFC 5322 states that implementations SHOULD limit lines to 78
characters or less, implementations MAY choose to allow overly long
encoded words to work around faulty implementations of encoded-words.
Implementations that choose to do so SHOULD have an optional
mechanism to limit line length to 78 characters.
Fujiwara Standards Track [Page 14]
RFC 6857 POP or IMAP Downgrade March 2013
7. IANA Considerations
The experimental specification from which this document was partially
derived [RFC5504] specifies that no new header fields beginning with
Downgraded- are to be registered. That restriction is now lifted,
and this document makes a new set of registrations, replacing the
experimental fields with standard ones.
7.1. Obsolescence of Existing Downgraded-* Header Fields
The Downgraded-* header fields that were registered as experimental
fields in RFC 5504 are no longer in use. IANA has changed the status
from "experimental" to "obsoleted" for every name in the "Permanent
Message Header Field Names" registry that began with Downgraded-.
7.2. Registration of New Downgraded-* Header Fields
The following header fields have been registered in the "Permanent
Message Header Field Names" registry, in accordance with the
procedures set out in the Header Field Registration document
[RFC3864].
Header field name: Downgraded-Message-Id
Applicable protocol: mail
Status: standard
Author/change controller: IETF
Specification document(s): This document (Section 3.1.10)
Header field name: Downgraded-In-Reply-To
Applicable protocol: mail
Status: standard
Author/change controller: IETF
Specification document(s): This document (Section 3.1.10)
Header field name: Downgraded-References
Applicable protocol: mail
Status: standard
Author/change controller: IETF
Specification document(s): This document (Section 3.1.10)
Header field name: Downgraded-Original-Recipient
Applicable protocol: mail
Status: standard
Author/change controller: IETF
Specification document(s): This document (Section 3.1.10)
Fujiwara Standards Track [Page 15]
RFC 6857 POP or IMAP Downgrade March 2013
Header field name: Downgraded-Final-Recipient
Applicable protocol: mail
Status: standard
Author/change controller: IETF
Specification document(s): This document (Section 3.1.10)
8. Acknowledgements
This document draws heavily from the experimental in-transit message
downgrading procedure described RFC 5504. The contributions of the
coauthor of that earlier document, Y. Yoneya, are gratefully
acknowledged. Significant comments and suggestions were received
from John Klensin, Barry Leiba, Randall Gellens, Pete Resnick, Martin
J. Durst, and other WG participants.
9. References
9.1. Normative References
[RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part One: Format of Internet Message
Bodies", RFC 2045, November 1996.
[RFC2047] Moore, K., "MIME (Multipurpose Internet Mail Extensions)
Part Three: Message Header Extensions for Non-ASCII Text",
RFC 2047, November 1996.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2183] Troost, R., Dorner, S., and K. Moore, "Communicating
Presentation Information in Internet Messages: The
Content-Disposition Header Field", RFC 2183, August 1997.
[RFC2231] Freed, N. and K. Moore, "MIME Parameter Value and Encoded
Word Extensions:
Character Sets, Languages, and Continuations", RFC 2231,
November 1997.
[RFC3461] Moore, K., "Simple Mail Transfer Protocol (SMTP) Service
Extension for Delivery Status Notifications (DSNs)",
RFC 3461, January 2003.
[RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, November 2003.
Fujiwara Standards Track [Page 16]
RFC 6857 POP or IMAP Downgrade March 2013
[RFC3864] Klyne, G., Nottingham, M., and J. Mogul, "Registration
Procedures for Message Header Fields", BCP 90, RFC 3864,
September 2004.
[RFC4021] Klyne, G. and J. Palme, "Registration of Mail and MIME
Header Fields", RFC 4021, March 2005.
[RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322,
October 2008.
[RFC5890] Klensin, J., "Internationalized Domain Names for
Applications (IDNA): Definitions and Document Framework",
RFC 5890, August 2010.
[RFC5891] Klensin, J., "Internationalized Domain Names in
Applications (IDNA): Protocol", RFC 5891, August 2010.
[RFC6530] Klensin, J. and Y. Ko, "Overview and Framework for
Internationalized Email", RFC 6530, February 2012.
[RFC6531] Yao, J. and W. Mao, "SMTP Extension for Internationalized
Email", RFC 6531, February 2012.
[RFC6532] Yang, A., Steele, S., and N. Freed, "Internationalized
Email Headers", RFC 6532, February 2012.
[RFC6533] Hansen, T., Newman, C., and A. Melnikov,
"Internationalized Delivery Status and Disposition
Notifications", RFC 6533, February 2012.
[RFC6854] Leiba, B., "Update to Internet Message Format to Allow
Group Syntax in the "From:" and "Sender:" Header Fields",
RFC 6854, March 2013.
[RFC6855] Resnick, P., Ed., Newman, C., Ed., and S. Shen, Ed., "IMAP
Support for UTF-8", RFC 6855, March 2013.
[RFC6856] Gellens, R., Newman, C., Yao, J., and K. Fujiwara, "Post
Office Protocol Version 3 (POP3) Support for UTF-8",
RFC 6856, March 2013.
Fujiwara Standards Track [Page 17]
RFC 6857 POP or IMAP Downgrade March 2013
9.2. Informative References
[RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234, January 2008.
[RFC5451] Kucherawy, M., "Message Header Field for Indicating
Message Authentication Status", RFC 5451, April 2009.
[RFC5504] Fujiwara, K. and Y. Yoneya, "Downgrading Mechanism for
Email Address Internationalization", RFC 5504, March 2009.
Fujiwara Standards Track [Page 18]
RFC 6857 POP or IMAP Downgrade March 2013
Appendix A. Downgrading Example
This appendix shows a message downgrading example. Consider a
received mail message where:
o The sender address is a non-ASCII address,
"NON-ASCII-LOCAL@example.com". Its display-name is
"DISPLAY-LOCAL".
o The "To:" header field contains two non-ASCII addresses,
"NON-ASCII-REMOTE1@example.net" and
"NON-ASCII-REMOTE2@example.com". Their display-names are
"DISPLAY-REMOTE1" and "DISPLAY-REMOTE2".
o The "Cc:" header field contains a non-ASCII address,
"NON-ASCII-REMOTE3@example.org". Its display-name is
"DISPLAY-REMOTE3".
o Four display-names contain non-ASCII characters.
o The "Subject:" header field is "NON-ASCII-SUBJECT", which contains
non-ASCII strings.
o The "Message-Id:" header field contains "NON-ASCII-MESSAGE_ID",
which contains non-ASCII strings.
o There is an unknown header field "X-Unknown-Header:", which
contains non-ASCII strings.
Return-Path: <NON-ASCII-LOCAL@example.com>
Received: from ... by ... for <NON-ASCII-REMOTE1@example.net>
Received: from ... by ... for <NON-ASCII-REMOTE1@example.net>
From: DISPLAY-LOCAL <NON-ASCII-LOCAL@example.com>
To: DISPLAY-REMOTE1 <NON-ASCII-REMOTE1@example.net>,
DISPLAY-REMOTE2 <NON-ASCII-REMOTE2@example.com>
Cc: DISPLAY-REMOTE3 <NON-ASCII-REMOTE3@example.org>
Subject: NON-ASCII-SUBJECT
Date: Mon, 30 Jul 2012 01:23:45 -0000
Message-Id: NON-ASCII-MESSAGE_ID
Mime-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8bit
X-Unknown-Header: NON-ASCII-CHARACTERS
MAIL_BODY
Figure 1: Received Message in a Maildrop
Fujiwara Standards Track [Page 19]
RFC 6857 POP or IMAP Downgrade March 2013
The downgraded message is shown in Figure 2. "Return-Path:",
"From:", "To:", and "Cc:" header fields are rewritten. "Subject:"
and "X-Unknown-Header:" header fields are encoded as encoded-words.
The "Message-Id:" header field is encapsulated as a
"Downgraded-Message-Id:" header field.
Return-Path: =?UTF-8?Q?NON-ASCII-LOCAL@example.com?= :;
Received: from ... by ...
Received: from ... by ...
From: =?UTF-8?Q?DISPLAY-LOCAL?=
=?UTF-8?Q?NON-ASCII-LOCAL@example.com?= :;
To: =?UTF-8?Q?DISPLAY-REMOTE1?=
=?UTF-8?Q?NON-ASCII-REMOTE1@example.net?= :;,
=?UTF-8?Q?DISPLAY-REMOTE2?=
=?UTF-8?Q?NON-ASCII-REMOTE2@example.com?= :;,
Cc: =?UTF-8?Q?DISPLAY-REMOTE3?=
=?UTF-8?Q?NON-ASCII-REMOTE3@example.org?= :;
Subject: =?UTF-8?Q?NON-ASCII-SUBJECT?=
Date: Mon, 30 Jul 2012 01:23:45 -0000
Downgraded-Message-Id: =?UTF-8?Q?MESSAGE_ID?=
Mime-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8bit
X-Unknown-Header: =?UTF-8?Q?NON-ASCII-CHARACTERS?=
MAIL_BODY
Figure 2: Downgraded Message
Author's Address
Kazunori Fujiwara
Japan Registry Services Co., Ltd.
Chiyoda First Bldg. East 13F, 3-8-1 Nishi-Kanda
Chiyoda-ku, Tokyo 101-0065
Japan
Phone: +81 3 5215 8451
EMail: fujiwara@jprs.co.jp
Fujiwara Standards Track [Page 20]
ERRATA
